Universal 4 Channel ABCD Wireless RF Remote Control Duplicator Copy 433 MHz Electric Gate Garage Door Key Switch Fob Controller
Works with the following remote control IC modules (please check your original remote control before ordering),and your remotes also should be Fixed code or IC of original remote control is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or without code.
Features
One to one key copy
Each key password alone save
Can continuous repetitive copy use one million times
Privacy is strong
Specifications
Working voltage: DC12V (27A battery not including)
Operating Current: ≤ 8mA
Working frequency: 433.92MHz
Modulation Mode: ASK (AM)
The transmission power: ≤ 100mW
Emission Distance: 50 to 100 m (proof)
The encoding type: self Copy
Works with the following remote control IC modules (please check your original remote control before ordering), and your remotes also should be Fixed code or
Uses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products
How to Program:
1. Press the One and Three buttons until the LED flashes - it takes around 3 seconds.
2. Place the cloner remote and the original remote close together/side by side so that they are touching.
3. Press a button on your original remote in the same time and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. (The Blue LED will first flash 3 times quickly, then stops for a second, then flashes steadily for successful cloning).
4. Now programming is successful! If you want to program more buttons just repeat steps 2 > 4. It's that easy! To reset the remote simply start again with step