Ultrasonic Wave Radiator Clean Heat Exchangers Industrial Parts Wash Machine Ultrasonic Cleaning Tank

200cm X 150cm X 60cm Ultrasonic Wave Radiator Clean Heat Exchangers Ultrasonic Cleaning Tank

The cleaning of heat exchangers is a labour intensive and costly business. In most cases high pressure cleaning will do the job using many litres of (hot) water and creating a substantial waste stream what should processed. Next to this the factor time is also an important issue.

The use of ultrasonic energy offers an alternative en a much more efficient way to clean heat exchangers. The generated cavitation separates the contamination without damaging the object.

Routine cleaning

Cleaning the ultrasonic cleaner and replacement of the cleaning solution is necessary at least daily or more frequently if solution soiled.

Performance testing

The efficacy of the ultrasonic cleaner should be tested at least weekly. The results of the testing shall be documented as part of the proof of process. Sonic cleaners fail for many reasons. Tests should provide a means of monitoring the variables that influence the effectiveness of the ultrasonic cleaning process. Some of these variables are water, time, detergent, enzyme, temperature, high pH, agitation, speed, initial heat, drying, obstructions, and insufficient amount of chemicals and equipment faliure

important factors for a succesfull cleaning process:

· Construction of the cleaning bath

· Intensity and right positioning of the ultrasonic transducers

· Process & chemistry control

Knowledge and experience in the field of ultrasonic cleaning are indispensable.

The right combination and implementation of these factors makes it possible to remove effectively residues of hydro carbons and several other refinery side products from the heat exchanger and this in a shorter time than other conventional cleaning techniques.

Ultrasonic - Safe, environmental friendly and efficient cleaning

Ultrasonic Radiator Cleaning Sheridan & Buffalo, 

Radiators are essential parts of every heating or cooling system whether they’re used in buildings or vehicles. Radiators facilitate the transfer of thermal energy from one medium to another, allowing the regulation of air temperature in a given space. Like any HVAC part, radiators tend to accumulate dust and dirt over time. When too much debris is present in the radiator,  its performance is stunted and energy efficiency is negatively impacted.

Unlike most parts of an average heater or air conditioner, the radiator can be pretty sensitive to the force applied during cleaning. Too much force can damage it while too little can allow dirt to linger inside. To strike the perfect balance between effectiveness and safety, we recommend ultrasonic cleaning for your radiators.

Captain Clean utilizes ultrasonic cleaning technology for the total removal of all debris in your radiator. This method makes use of powerful sound waves blasted at high and low frequencies to agitate particles that cling tightly to your radiator’s body. When combined with gentle aqueous cleaning solutions, ultrasonic cleaning can flush out a few years’ worth of dirt from your radiator and help it perform like new.

Using aqueous (water based) detergents, ultrasonic equipment effectively removes oil, swarf and other contaminants from a wide range of components such as heat exchangers, lube oil filters, valves, radiators, coolers, turbine and drilling equipment used in the oil and gas industry. This maximises throughput and increasing productivity, making it one of the most effective and environmentally friendly ways for cleaning these parts and components.

We are also experienced in supplying ultrasonic cleaning systems for on-board processing, providing and adapting functions to suit your specific requirements.

Ultrasonic Cleaner Auto Industry

We are the manufacturers of custom built Ultrasonic Cleaning machines for degreasing and cleaning of auto parts for OEMs , work shops , job works and auto-restoration industry. We expertise in providing customized designed solution for auto parts cleaning.

Ultrasonic cleaning is a water based cleaning solution where ultrasonic transducers are used to provide cavitation agigation insude the tank which has waer and suitable chemical to clean oil,dirt,debree,grease and other contaminants from various types of auto components.

We expertise in all types of ancilary parts washing like brakepads, steering coloumns, crank shats, pistons, valves, gaskets, clutch pads, mirrors and many more.

Features of the machine:

•Low maintainence machine

•Heavy duty cleaning systems

•Chemical friendly- SS Rust proof body

•Industrial guage farication, build to last

•One year warrenty on any manufacturing defect

•Completely customized to suit the cleaning requirement

•Less human interfearance and less scope of error

•Accurate and uniform cleaning everytim

Powerful Industrial Ultrasonic Cleaner
The largest ultrasonic tanks can include tanks as big as 1,000 gallons or more. These units are meant for applications requiring lower frequencies (25-40 kHz), including larger or heavy duty equipment such as over-sized manufacturing parts, automotive and marine parts and large musical instruments. Units may have multiple built-in stages, including rinse and dry stations, and are sometimes automated
We all want to look our car shiny, and running smooth. And for this very reason timely servicing your car from inside out is one of the most important thing you should not avoid

Why Use Automotive Ultrasonic Cleaner?

There are so many uses for an ultrasonic cleaner in an auto shop. Ultrasonic car parts cleaning saves time by eliminating the need for manual scrubbing of auto parts covered with grease, oil, and other lubricants. Besides freeing up time, the hazardous chemicals can be replaced with biodegradable soaps. Specific examples of items that are commonly cleaned by a benchtop ultrasonic cleaner include filters, shock absorber parts, power steering parts, pistons, valves, fuel injectors, bearings – just to name a few. Larger industrial-sized units can be used for carburetor ultrasonic cleaning and ultrasonic exhaust manifold cleaning, where cleaning action is needed deep within the network of passages. This large capacity also allows for ultrasonic crankshaft cleaning and ultrasonic cylinder block cleaning as well the means to clean multiple parts at once.

Cylinder Heads And Engine Blocks Ultrasonic Cleaners

Automotive Ultrasonic Cleaners is primarily an aqueous tank systemthat uses ultrasonic energy to remove dirt, grease, oiland baked-on carbon from parts. Contaminants such aspaint, rust, glued-on gaskets, and heavy layers of bake don carbon can also be removed by ultrasonic cleaning but require more aggressive chemistries. Unlike someother cleaning processes, ultrasonic cleaning will notdamage intricate, lightweight, or easily damaged parts. 

Our Ultrasonic cleaning process, can effectively clean the following components- Cylinder Heads And Engine Blocks And Aircraft Parts ,Aluminum castings, engine blocks, Carburetors, Cylinder Heads, Engines, Engine Components, Gear Boxes, Filters, Tubes and Valves.

AG Cylinder Heads And Engine Blocks ultrasonic cleaning machine are revolutionizing cleaning methods and processes on the Valve Plates  , our Valve Plates And Aircraft Parts ultrasonic cleaning machine can clean all kinds of automotive, aircraft, and marine engine parts, ultrasonic technology for cleaning parts eliminates manual labor while providing you with superior cleaning action, most parts can be cleaned with environmentally friendly water-based solutions

ultrasonic tank models Basics and spcifictaion

Model: T-180S details:

Why Use Cylinder Head Engine Block Cleaning ?
Agsonics is renowned for their professional cleaning service to the motor industry.

How does ultrasonic cleaner technology clean?

Cavitation bubbles are vacuum cavities as tiny as red blood cells, or about 8 thousandths of a millimeter across. They are so small that it would take 1,250 of them lined up in a row to reach 1 cm long.

Under pressure of continuous vibration, these bubbles stretch and compress at a fast rate. Once they reach a certain size, as determined by the frequency and strength of the sound waves produced, the bubbles lose structural integrity and collapse violently. When these implosions happen near a surface, the bubbles emit high-powered streams of plasma that travel at more than 500 miles per hour and collide with, agitate and remove even very tiny particles and substances from that surface.

Suitable for all types of engine parts
AG engine block ultrasonic cleaning machine effectively and thoroughly clean all types of engine parts
01: Automotive: thoroughly removes carbon deposits, grease, and other types of dirty and contaminants from carburetor, exhaust manifolds, cylinder blocks, 2-stroke and 4 stroke motorcycle engines, snow machines, ATV cylinders and heads, and more.
02: Marine: Suitable for inboard and outboard motors, the cleaning chemistry is both thorough and gentle on the aluminum parts reducing the risk of future corrosion
03: Aircraft: The high performance demands of aircraft engines establish the need for an intensive cleaning process that will restore the engine part to near original condition, our engine block ultrasonic cleaning machine easily, thoroughly, and safely clean both large and small parts, turbine blades, fuel nozzles, generator components, brakes and other parts that require periodic cleaning are all effectively and thoroughly cleaned using the ultrasonic cleaning process

Supply high quality product
Provide OEM&ODM service
One Year Warranty
24/7 response.
Technical support for all time.
Professional suggestion for your cleaning job.
Full inspection for every product we made.

•Bench-top and table-top designs for smaller applications

•Large cleaning tanks

•Multi-stage ultrasonic cleaners which include cleaning, rinsing, drying, or other processes

•Submersible systems to provide existing tanks with cleaning capabilities

•Industry-specific cleaners for aerospace and automotive parts cleaning applications

•Metal strip and wire cleaning machines

•Automated Systems:  AGSONIC  offers 4 different types of automated systems

If you are in need of an ultrasonic cleaner, you will find what you are looking for at AGSONIC 

ULTRASONIC GENERATORS
Ultrasonic generators differ in the waveforms they emit and their output ratings. Three forms of output may
be used, full wave, half wave, and continuous wave. When discussing generator output power always refer
to the average output power, not the peak output those without electrical knowledge may be easily misled
so again request average power output.
The manufacturer or supplier of the cleaning system should have a frequency/watt meter available to verify
the output frequency and output wattage of the generator. Checking the input power to the ultrasonic
generator is of little value when you are interested in the output power, don’t be fooled.
To protect the generator from electrical fluctuations and spikes the generator output may be de tuned by as
much as 10% but never any more. The frequency/watt meter is the best way to check output frequency and
wattage.
1) Virtually all-Industrial ultrasonic generators have automatic frequency tuning.
2) Generators with constant power output hold power output when input voltage changes.
3) Generators should have a power intensity control to control output power.
4) It is advisable to have sweep frequency
5) It is advisable to have a control to adjust the sweep repetition rate.

Best Ultrasonic Cleaners for Auto Parts And Car Engine
Ultrasonic cleaner for engine parts are available in different size and versions that are suitable for the variety of needs – including the clean up of your car engine parts.
Here we provide our best reviews on top selling ultrasonic cleaners for car engine parts. Just check them out and get one as per your requirement.

Why choose ultrasonic cleaning machine to clean our engine block and engine parts?

Clean intricate and difficult to reach areas easily

A major challenge of any cleaning system is the difficulty faced in tackling tiny spaces, intricate geometries, and difficult to reach surfaces, ultrasonic cleaning penetrates even blind holes and small apertures, that previously had hit-and miss success rates, the uniform agitation of the cleaning solution ensures that the cleaning action penetrates even hard to reach areas that previously required specialized brushes and other complicated cleaning devices with no real guarantee of a successful and consistent cleaning outcome, various factors go into determining which combination of an ultrasonic unit and chemical solution is suited to your particular requirement

For effective cleaning the ultrasonic cleaning machine must use the right of cleaning chemistry,operate at the right temperature and use the correct frequency, the part to be cleaned the contaminant to be removed and the degree of soil, determine this, our years of experience advising manufacturing and maintenance clients on the right process for their cleaning needs help us identify the exact product combo that you need, just send AG SONIC email or call us, and we’ll guide you to the right solution quickly

Ultrasonic technology uses absolutely no harmful chemicals.
No fumes. No strong odors. No dangerous or expensive chemical disposal. Reduced risk.
The technology is remarkable, but the process is easy. More efficient and effective than chemical processes, the machines are as simple to use as a dishwasher, with no hand labor or supervision necessary.

How do ultrasonic machines work?
Ultrasonic tanks generate high frequency sound waves through the use of transducers and electronic ultrasonic wave generators. Typical transducers are made from piezoelectric crystals which convert electrical energy into mechanical / sound wave energy because piezoelectric crystals change geometric size when electrical voltage is applied.

Q.  "Will ultrasonic cleaning remove the contaminants on my parts?"
A.  The answer to this question relies almost entirely on the bond strength between the part, and the contaminant.  If the contaminant has no physical or chemical bond to the surface, then ultrasonic cleaners will capable of removing it.  However, if the contaminant has a strong bond to the part, such as that found with burned carbons, then a detergent must be selected which will have the ability to loosen the bond to a degree where the ultrasonic cleaner can easily remove it.  This is why the use of proper cleaning fluids is so important in the ultrasonic cleaner.
 
Q.  "Which ultrasonic frequency would be most appropriate for my application?"
A.  This depends upon many factors, including part size, contaminant, material of construction of the part, and others.  Traditionally, the heavier the part, the lower the ultrasonic frequency in use.  The more detailed the part, the higher the frequency which should be used.  This is one of the advantages of our ultrasonic cleaner, which includes more than 1 frequency in the same tank.  allows us to provide scrubbing power, without sacrificing penetration and detailed scrubbing action.