Ultrasonic Nozzle – High frequency vibration
* High efficiency,reduce material consumption.
* Very low flow rate capabilities,intermittent or continuous.
* Non clogging.
* Corrosion resistant
* High precise and highly controllable.
Ultrasonic Spray Nozzles
Unlike conventional spray nozzles that rely on pressure and high velocity motion to shear a fluid into small drops,the ultrasonic spray nozzle uses only low ultrasonic vibrational energy for atomization.It is widely used for ultrasonic spray coating and pyrolysis.The rate at which the liquid is atomized depends,within limits,solely on the volume that is being delivered onto the atomizing surface.Typically,the higher the frequency ,the lower the processing capability.The amount of material atomized can be as little as 1 μl/min.
Ultrasonic Nozzle – High frequency vibration
* High efficiency,reduce material consumption.
* Very low flow rate capabilities,intermittent or continuous.
* Non clogging.
* Corrosion resistant
* High precise and highly controllable.
Ultrasonic Nozzle – High frequency vibration
* High efficiency,reduce material consumption.
* Very low flow rate capabilities,intermittent or continuous.
* Non clogging.
* Corrosion resistant
* High precise and highly controllable.
The WideMist System which is one of the most popular ultrasonic spray nozzles offers wide adjustable spray widths range (20mm-150mm per nozzle), wide controlled flow rate range (0.1ml/min-200ml/min per nozzle) and wide droplets size options (15um-60um). Compared with conventional pressure spray technology, it has significant advantages in a broad range of applications. Whether large width fabrics, float glass, metal sheet or special shaped industrial or consumer products, the WideMist system maintains highly precise control of the coating at the deposition rate you require. Waste of raw material is significantly reduced, since the ultrasonic atomization can work well without high pressure air. As a result, the pollution due to VOCs is greatly reduced as well. In addition, maintenance is also much lower than conventional spray coating methods because ultrasonic nozzles don't clog.
Ultrasonic Spray Nozzle K40
Ultrasonic Generator DP30.