Product introduction:
JS coating is a kind of two parts waterproof coating which is a composition of polymer emulsion and inorganic power. It is a new type of waterproof coating that bears excellent performance owing to the introduction of foreign advanced technology and the integration of high elasticity of organic materials and durability of inorganic materials.
Character:
1.Carry out construction directly on many kinds of wet and dry material’s base.
2. Non-toxic, Non-polluting, applied to drinking water project.
3.Non-toxic, Non-polluting, applied to drinking water project.
4.High bond strength between coating layer and base layer.
5. Easy operation, safe and short project time limit.
6.Easy operation, safe and short project time limit.
Tech. Data:
Test Item |
Technique Data |
|||
I |
II |
|||
1 |
Solid content % ≥ |
65 |
||
2 |
Drying time |
Surface drying time,h |
≤4 |
|
Hard drying time,h |
||||
3 |
Tensile strength |
Mpa ≥ |
1.2 |
1.8 |
4 |
Elongation at Break % ≥ |
200 |
80 |
|
5 |
Low temperature flexibility |
-10℃ No cracking |
— |
|
6 |
water tightness 0.3Mpa,30min |
Impermeable |
Impermeable |
|
7 |
Mpa Bond strength ≥ |
0.5 |
1.0 |
|
8 |
anti-permeability Mpa ≥ |
— |
0.6 |
Construction points:
1.Tools: hammer, chisel, broom, steel wire brush, platform scale, mix cask, mixer, roller brush, brush, scraper, scissors, etc.
2.Base surface : plat, firm, clean, water invisble
3.Detail Enhancement: work a cloth two coating additional layer on coat convex & concave corner, tube root, draining outlet, deformation joint, defect joint,etc.
4.Mixing: put the powder into the emulsion little by little according to the required proportion, low-speed mixing to uniform and no mass
5.Coating operation
Why choose us?
LangWei Conchem is a fast growing international manufacturer of construction chemicals with plants in Beijing, China. The company is specialized in preventative and remedial waterproofing products.
Preventative waterproofing products are wildly used during new construction and are usually installed by the general contractor. Examples are bentonite strips, hydrophilic mastics and rubbers, which swell in contact with water and hence block water ingress, injection hoses, which can be injected at a later stage to block water and finally cementitious coatings for basement waterproofing and elastomeric membranes for tanks and roofs.
Remedial waterproofing products are mostly used when major (or minor) water leaks happen at a later stage and are usually applied by specialist applicators. Remedial waterproofing products are also often used during construction of tunnels and other underground constructions to prevent infiltrating water from hindering the normal progress of the works. Examples are injection resins based on Polyurethanes (both 1C and 2C) and Poly-acrylates. These products are also used for Soil and Rock Stabilization, together with Organo-minerals.
LangWei Conchem also manufactures a series of products for the Protection and Repair of reinforced Concrete. Examples are cementitious grouts and mortars, epoxy injection resins, carbon fibre laminates and epoxy glues.
Beijing Langwei Times Technology and Science Co., Ltd.
Room 503,4A Modern Zone No.16 Baiziwan Road Chaoyang
District,Beijing,(100022),China
Tel:0086-10-6708 1601
Fax: 0086-10-6708 1400