Feature:
1. USB Type C Female With Screw Terminal Block Cable can extend the length of the USB cable and DIY high-quality cables for data transmission and charging. The cable is 30cm long.
2. USB-C Solderless terminal is fixed with screws, no soldering required. You only need to use stranded or solid wires and a small screwdriver (give screwdriver) to create custom wiring jigs. Simple and convenient, saving time and effort.
3. This TypeC Cable of 5 Pin pluggable screw terminal can connect a shielded wire, made cable has shielding function, can effectively shield the interference of external signals.
4. This Type-c terminal cable socket is USB2.0, the bandwidth is 480MB/S, theoretically it can transmit 60MB of data per second (actual speed is about 20MB-60MB/S according to different cable lengths), the signal is stable and safe.
5. Compact design and reliable connection are compatible with wide, suitable for mobile phones, tablets, computers and other devices with USB Type-C interfaces.
Pluggable design Terminals
Pluggable design terminal for flexible switching of all USB 2.0 solderless wires without rewiring
5-pin (way) bolt screw terminal pluggable connector can be plugged into the typec plug, Then connect the socket to the other
wires, The length of the typec cable can be extended.
Detailed wiring
There are two ways for wiring the solderless usb c extension, connecting with or without shielded wires..ow the tips provided by the head to connect one by one. After confirming that it can be used normally, seal it with electrical tape to avoid leakage.
Wiring Notes
When wiring the screw terminal connectors, just loosen the top screw of the terminal and put it into the corresponding cable (you need to open the outside and put it into the copper wire part inside)
Screw Termainal Line description
S : Shielded wire
+ : Positve dlectrode(Red)
D- : Data(White)
D+: Data(Green)
- : Negative electrode(Black)
Specification:
Product function: data transmission, charging extension function
Product Plug: USB 2.0 type c male
Product terminals: 5P pluggable screw terminals screw connector USB shielding cover
Product Material: Copper
Product Line Diameter: OD4.0mm
Cable Length: 30cm
Wiring Mode: solder free, terminal screw fixing Applicable
Compatitive Cell Phones, PC, Notebook, and other interface devices with USB TypeC
