U Tech completely automatic bottle cap lining inserting cutting machine/cap seal liner cutting machine

Automatic cap lining machine , which can cut the foil roll into liner and insert the liner into cap at the same time, with the
speed up to 120 pieces/min. The body is provided with a turntable, the periphery of the turntable is provided with an equidistant groove matching with the bottle cap, and a bottle cap finishing and conveying device is arranged on one side of the body, and a bottle cap conveying device is arranged on the machine body, and the punch of the blanking device is installed at the pad in position One side of the blanking device of the gasket is provided with a discharging and rolling frame directly above the groove.The structure of the utility model can directly stuff the gasket into the bottle cap after blanking, which has a high degree of automation, greatly reduces the labor intensity of workers, and improves the production efficiency.

1. including one set host equipment, one set pulp liner Locate and inserting equipment,one set pulp roll sending machine,one set wasted pulp roll colloecting machine, one cap elevator.
2. one set round cap liner model;
3. PLC system, touch screen operation system.
4. automatic cap arranger,automatic Rejection system for improperly caps , which upside down.
5. the turntable locating, cutting and inserting the pulp liner into cap more precisely.
6. the foil roll diameter for foil sending machine: inner diameter is 76mm, outside diameter is no less than 500mm.
7. the length of pulp roll can be adjustable. So it can make sure the inserting job more precisely.
8. high quality and performance. It can work 24 hours per day and no stopping.
9. with counting function and output pre-setting function10. with the detect function for liner missing and reject the no liner cap (this function is base on the cap colour different from pulp liner colour)
11. system stop and alarm when caps are in short supply
12.safety running: automatically alarm and stop when breakdown occur
13. The work speed is 120 caps per min.
14. Electric Power source :220V,50-60HZ, Single power supply;(also, can be design according to customer requirement)
15. use UL PLC, touch screen, Switching Power Supplier, button.