Type GQ-150 Drill Pipe Cleaning Machine Pipe Drain Cleaning Machine
Product Description
Type GQ-150 brief introduction: That is applicable for indoor pipelines of 20-150mm in diameter, up to 30m in extension length. Multifunction and high power with wide applications. It can be connected with soft shafts of φ8 φ16 φ 22. The control knob is for switching on/off circuit and controlling rotation direction of output shaft. And when you operate Control Handle, press the handle to move the machine clutch, which makes the flexible shaft to rotate. Releasing the handle stops the flexible shaft rotation immediately. Warning: The pressing force shall not exceed 20Kg, preferably to the extent of locking the flexible shaft. Do not use force multiplication tool. initial state is "standby". Cog down state is "working". Soft φ8 soft shaft combination:
Used for machines of GQ -150. The length of the shaft is 5m. It can be used in pipes of 20-50mm in diameter, with reverse water bend
Flexible soft shaft
Sectional elastic soft shaft
Enhanced strong soft shaft
Soft Shaft holder for keeping and storing flexible shafts
Protection tube
Special Drill-Unique, new and durable
Maintenance and after-service: 1 Keep the machine well lubricated. Inject the lubrication oil (20# and 30# oil) into oil holes before and after each use. It is highly recommended, when finishing the operating, that you lubricate the machine after 2-3 minute free rotation and keep it at a dry -place. 2 Keep lathe electric part of the machine from getting wet. It is prohibited to operate the machine in water. 3 When the insulation resistance of the machine is less than 2MΩ, it indicates the machine is wet. Better to stop operate the machine. 4 Prior to the next use after long time storage, check the machine for free rotation, then turn on the control switch. 5 After finishing use of the flexible shaft and drills, flush and dry them clean. 6 Warning: Shut down the machine and disconnect the electric power before making any adjustment, accessory assembly and maintenance. 7 Warning: Use approved rated power supply and less- than - 10A fuse.