Two Way Communication Dual Source Generator Multi tariff Control Keypad Prepaid Token Electric Energy Meter
Two Way Communication Dual Source Generator Multi tariff Control
Keypad Prepaid Token Electric Energy Meter
The CA368 is a three phase four-wire, compact design keypad based and STS token operated prepayment meter. It is in a compact BS housing and extended transparent terminal cover. The meter is manufactured by ISO9001 standard with IP54 protection rating. Thanks to a wide range of power supply (Un -40% +20%) and improved RF immunity withstand of 30V/m, it can operate in harsh environments.
The CA368 is ideal when separating accommodation, i.e. flats, apartments, houses offices where you have only one power supply. It is usually very expensive to pay a utility company to add extra supplies. Tiger Meters offer a low-cost alternative and it allows you to keep control of your electricity usage.
Features
a) 20 digit (Standard Transfer Specification) STS standard compliant encryption
b) Com ports for easy data interrogation
c) Unidirectional measurement of both active and reactive energy
d) Adjustable load limit and low credit warning level
e) Tamper guard and event record such as opening cover, reverse connection, black-out
f) Recall 12 months historical usage data and last 5 entered token
g) Maximum demand measurement
h)Programmable target usage on daily , monthly basis
i) Remote topup / recharge
AMR/AMI Smart Metering Features (optional)
1) Split connection to User Interface Unit (UIU)
2) PLC/ RF/ GPRS/GSM communication with a head-end AMR/AMI server
3) Time of Use (TOU) / 4 tariffs /8 time divisions /100 holidays.
4) Advanced load control and disconnection features
5) DLMS/COSEM , IEC62056 protocol compliant
Specifications:
|
Electrical parameters: |
|
|
Nominal voltage Un |
3x240V |
|
Limited voltage |
60%~120%Un |
|
Frequency |
50/60Hz+5% |
|
Basic current(Ib) |
10A |
|
Maximum current(Imax) |
100A |
|
Starting current(Ist) |
30mA |
|
Active energy constant |
400imp/kWh |
|
Accuracy |
|
|
Active energy to IEC62053-21 |
Class1.0 |
|
Reactive energy to IEC62053-23 |
Class2.0 |
|
Power Consumption |
|
|
Power consumption in Voltage circuit |
<2W <8VA |
|
Power consumption in current circuit |
<1VA |
|
Temperature range |
|
|
Operation meter |
25℃ to+70℃ |
|
Storage |
40℃ to+85℃ |
|
|
|
|
Insulation strength |
|
|
AC Insulation strength |
4kV at 50Hz during 1min |
|
Impulse voltage 1.2/50μs mains connections |
8kV |
|
|
|
|
Electro Magnetic Compatibility |
|
|
Electrostatic discharges |
|
|
Contact discharge |
8kV |
|
Air discharge |
16kV |
|
Electromagnetic RF fields |
|
|
27MHz to 500MHz typical |
10V/m |
|
100kHz to 1GHz typical |
30V/m |
|
Fast transient burst test |
4kV |
|
Mechanical requirements |
|
|
Protection Rating |
IP54 |
|
Insulation Classification |
Protective Class II |
|
Maximum cable size |
10 mm |
Vending System
a. Original Vending Process (Recharge Process)
The user go to a vending point (need a computer or other devices installed with our software), pay and get a ticket which printed a Token (a 20-digit code, generated by our software according to the recharge amount and unique meter ID); The user hold the ticket, back home and input the Token by the keypad on the prepaid meter, recharge successfully.
b. USSD & Mobile Money
We can provide api of our vending system, which you can integrate local USSD system or third mobile payment platform. When the user pay by USSD or mobile money via phone, our system will get a inform and generate a token and send it to the user by message.
USSD
Mobile Money
Our vending system is certificated by STS association from South Africa, The STS prepayment standard is very popular on the Africa market.
Which means our vending system can not only support our prepaid electricity/water/gas meter, but also can integrate into others prepaid meter as long as the meters is manufactured according to the STS standard.
Conversely, we can produce STS prepaid meters based on the Customers’ parameters so that their own STS vending system can generate Token for our meters.
Q: Are you a trade company or a manufacturer?
A: We are a original meter manufacturer and solution provide, we can provide more support for you.
Q: Do you provide samples for testing, free or extra?
A: We can provide samples, but we will charge reasonable cost.
Q: What's paypment terms you accept?
A: Paypal/West Union/ T/T / L/C is available. payment ≤USD2000, 100% In advance. payment>USD2000, 30% in advance by T/T, balance payment before shippment.
Q; How long is your delivery time?
A: Generaly it is 5-10 days if the goods is stock, or it is 15-30 days based on your order quantity.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier