Tuning fork density meter for measuring liquids containing particulate impurities is easy to install
The Direct Insertion digital liquid density meter can detect density on line in real time. It can be applied to process control of products with density as basic parameter or quality control with solid percentage or concentration percentage as reference. Typical industries include petrochemical industry, brewing industry, food industry, pharmaceutical industry and mineral processing (such as clay, carbonate, silicate, etc.), which are specifically applied to interface detection in multi-product pipelines in the above industries, density detection of stirred mixture, end-point monitoring of reaction kettle, and segregation device interface detection.
The plug-in density meter adopts plug-in installation and is widely used in pipelines, open tanks and closed tanks to detect the density of the medium. The density of the fluid directly depends on the vibration frequency received by the tuning fork in the sensor inserted into the medium. The built-in temperature sensor of the sensor provides temperature compensation for it.
The exterior stainless steel sleeve can help block the mixture particles to impact the density measurement by the fork sensor , it is good performance in the liquid mixture application .
Semi-finished circuit board
Product name | Direct Insertion Fork densitometer |
Measurement range | 0.5-2.5 g /cc (500-2500 kg/m3) |
Function | Test Density |
Temperature range | -50 c ~+150 c |
Measure Range | 0-2500kg/m3 |
Accuracy | ±2kg/m3 |
Max Working Pressure | 207bar (3000psi) |
Medium Viscosity | 0-20000cp |
Power Supply | 24 V DC |
Signal Output | 4-20mA /RS485/0-1000HZ |
IP Grade | IP67 |
Wetted Material | SS316/SS2205/Hastelloy C/ PTFE |
Process Connecting | Flange |
Installation Pipe Request | Min DN100,full flow pipe , flow speed less than 5m/s |
After the finished product is aging, the quality can be guaranteed before the shipment can be arranged
High Temperature Model Anti-corrosive Model :
With Extra Installation Device (Three -Way Pipe Connector ) For Site Can not Install Directly .
WE PROMISE :
100% Original Direct Factory
100% Independent R&D
100% Production By Ourselves
100% Heart Service
We Can , So We Promise Here !
Welcome Your Inquiry !