Tungsten Carbide Stud for High Pressure Grinding Rolls HPGR
Roller machine is a high efficient crushing machine widely used in cement plant, mining, thermal power plant, coal chemical industry.
The stud pin, which fitted into roller sleeve, is the key small parts of roller machine to make roller machine with high wear resistance and high compression strength and to meet with demanding under different work conditions.
The tungsten carbide stud pin for HPGR (high pressure grinding roller) is of excellent wear resistant and compression strength, which widely applied to crushing of various material.
Features of tungsten carbide wear-resistance stud pin:
1. Circular arc chamfer to minimize the possibility of damage during production, transportation, installation or in service;
2. High density and strength due to overpress cementation;
3. Particular workmanship eliminate the surface strain generated in production meanwhile increase the surface hardness.
Installation of cemented carbide stud pin
1. Bead weld; 2. cold fitted; 3. hot fitted; 4. glued
Grades, Properties And Applications Recommended
Grades |
Density(g/cm³) |
Hardness(HRA) |
T·R·S(N/mm2) |
Application |
YG4C |
15.00 |
89.5 |
1800 |
Mainly used as small buttons for percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
YG6 |
14.80 |
89.5 |
1700 |
Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
YG8 |
14.70 |
88.5 |
2300 |
Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
YG8C |
14.70 |
88.0 |
2300 |
Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
YG9C |
14.50 |
87.0 |
2400 |
Mainly used as the inserts and buttons for rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations. |
YG11C |
14.40 |
86.5 |
2450 |
Mainly for the inserts and buttons of heavy rock drill bits and rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations. |
YG13C |
14.30 |
86.0 |
2500 |
Mainly used as the inserts and buttons of tricone bits rotary-percussive bits and heavy rock drill bits to cut medium-hard and hard formations. |
YG15 |
14.00 |
86.5 |
2500 |
It is stronger, and is mainly used as the inserts and buttons of rotary-percussive bits, heavy rock drill bits to cut hard and very hard formations. |
YG16 |
14.10-14.30 |
87.5 |
2400 |
It is mainly used for making cemented carbide substrate tips to be used in PDC cutters for excavating coal and oil field PDC bits. |
YG20 |
13.40-13.70 |
85.0 |
2254 |
Mainly for the stamping dies used in the conditions of heavy impact load and large strees. |