1. Specifications:
Character | FEP |
specific gracity | 2.12-2.17 |
melting point(℃) | 270 |
maximum continous user temperature(℃) | 200 |
tensile strength(mpa) | 19-22 |
coefficient of elongation(%) | 250-330 |
dielectric constant 10^3HZ 10^6HZ | 2.1 2.1 |
volume resistance(Ω-CM) | >10^18 |
dielectric breakdown strength v/mil | 500-600 |
2. Use:
~ Photovoltaic solar cell tube
~ Semi-conductor product equipment
~ Heat exchange equipment, steam tubing
~ High pure reagent pipe
~ All kinds of causticity medium (rigor impregnant) pipe
~ Double pole ionic membrane caustic soda producing tube
~ Electric wire and cable jacket, slot insulation tube
~ Fluorin plastic O airproof loop tube
3. Features:
1) High and low temperature resistance
-200 ~ 255℃ high temperature intensity twice than F4
2) Not sticky, waterproof, oil proof
3) Electricity reliability, high insulation
Under 60HZ60MHZ, dielectric constant is 2.1. Even if firing, and it will
stll insulate.
Volume resistance > 10^18Ωm
Surface resistance > 2 X 10^13Ω
Voltaic Arc > 165 seconds, insulation
4) Corrosion resistance
Only under high temperature, fluorine and alkali metals will have
chemical reaction, no reaction with all of other thick and thin
inorganic acid, alkali, ester.
5) Low water absorption
Low suction rate < 0.01%
6) Non inflammability
The air will not burn. (Oxygen index > 95vol.%)
7) High transparency
Lowest refractive index in the plastic material
8) Weather resistance
Under ozone and sunshine for long time
9) Easy to process for second time
Can be self-close, self-welding, flanging, it can make into coil pipe
4. Detail pictures:
Main Products:
*FEP/F46 transparent tube, insulation tube, heat shrink tube, coil pipe, liner tube, bellows,
painting tube, sheet, rod, film, welding rod
*PFA transparent tube, insulation tube, heat shrink tube, coil pipe, liner tube, bellows,
painting tube, sheet, rod, film, welding rod
*PTFE/F4 tube, liner tube, high pressure stainless steel braid hose, bellows, painting tube,
rod, sheet, film
*PVDF/F26 tube, PVDF connector, PVDF tee
*At the same time, all of fluorine plastic tube and products, we can accept customized
in special size
Suzhou Aixin Fluorine Plastic Products Co.,Ltd is a manufacturer that specializes in Fluorine products’ researching and producting .Our company have gained ISO 9001:2000 certification,
all of products have passed the government test, including EU’ SGS standard.