Triple Phase 220V AC Frequency Converter 50Hz 60Hz
Triple Phase 220V AC Frequency Converter 50Hz 60Hz
GK510 Sensorless Vector Control Variable Frequency Drive Inverter
Brand: GTAKE
Certificate: CE, RoHS
| VFDs Model | Power Rating | Input Voltage | Output FREQ | Type |
| GK510 series | 0.75kW-2.2kW | 208V~240V / 380~480V, ±10% | 0.00-600.00Hz | DC/AC to AC inverters |
| 01 | Common DC bus solution is permissible for GK510, a big promotion in the efficiency of energy saving; |
02 | Stronger wobble frequency: Optimized wobble frequency inside GK510 enables the drive to have a wider fit to all kinds of traverse motion. All parameters and trigger conditions of wobble function can be set flexibly. Remarkable control capability pledges spindle smooth without bumps; |
03 | Textile industry locations are always filled with cotton fiber and have high ambient temperature. Gk510 dedicated drives are equipped with completely separated heat sink, as well as forced air cooling and water cooling are selectable; |
04 | GK510 drives supports remote control panel operation including parameter copy, a benefit for textile industry and OEM users to reduce the cost of commissioning; |
05 | This drive supports multiple frequency references, a lot of ogic and /or hard ware combination, meeting a variety of industrial requirement; |
| Mains Supply (R/L1,S/L2,T/L3) | |
| Supply voltage | 208-240V ±10% 380-480V ±10% |
| Power source frequency | 50/60Hz ± 5% |
| Switching on input supply | Maximum 2 times/min |
| True Power Factor | 0.92 nominal at rated load |
| Displacement power factor (cos φ) | (> 0.98) |
| Output Data (U, V, W) | |
| Output voltage / frequency | 0-100% of supply voltage / 0.00-600.00 Hz or customized |
| Switching on output | Maximum 2 times / min. |
| Ramp time | 0.01-60000 S |
Note: | 150% current can be provided for 1 minute, 180% for 10 seconds. Higher overload rating is achieved by oversizing the drive. |
| Digital Input | |
| Programmable digital inputs | 5 |
| Logic | NPN or PNP |
| Voltage level | 22V-26V |
| Input | 24VDC, 5mA |
| Frequncy range | 0-200Hz |
| Analog Input | |
| Analog inputs | 2 |
| Modes | Voltage or current |
| Level | 0/-10-10V |
| Current range | 0/4-20mA Scalable |
| Digital Output | |
| Programmable digital outputs | 2 |
| Voltage level at digital output | 0 - 24 V |
| Current range | 0-50mA |
| ModBus | |
| Format | RTU / ASCII |
| Rate | 4800 / 9600 / 19200 /38400 / 57600 |
| Relay Output | |
| Programmable relay outputs | 1 |
| Remote Panel | |
| Maximum cable length | 5m |
Compact and Powerful
GK510 dedicated drives are tailored for textile industry, powerful in performance and compact in sizes. Their frame dimensions, dedicated function, and type of heat dissipation are all considerate for various textile machines. |  |
Why choose GTAKE variable frequency drive?
In the trend of advocating smart and simple industrial automation, environmentally friendly products, value-added solutions, Gtake, as one of the world's leading drive manufacturers aggressively investing in R&D, production, and continuous quality improvement, is well positioned to provide its customers with technology-driven, performance-outstanding products such as VFDs, wind power converters, servo drives, HEV/EV drives, helping its customers save energy and increase industrial productivity with sustainability on the one hand, and enhancing their entire value-chain quality, delivery, and services on the other hand.
Production
In production, rigorous quality control is implemented on components, circuit boards, and the finished goods, assuring products without defects.
GTAKE VS Other brands
| Performance | Common brands | GTAKE |
| Applicable motors | Asynchronous motors | Asynchronous /synchronous motors |
| Starting torque | 2.0Hz, 150% (sensor-less vector control) 0Hz, 180% (closed-loop vector control) | 0.5Hz, 180% (sensor-less vector control) 0Hz, 200% (closed-loop vector control) |
| Speed adjustable range | 1:100 (SVC), 1:1000 (VC) | 1:200 (SVC), 1:1000 (VC) |
| Ambient temperature (no derating required) | -10-40ºC | -10-50ºC (for most of the models) |
| Rated input voltage | 208VAC-400VAC | 208VAC-480VAC |
| Communication | Modbus RTU//ASCII | Modbus RTU//ASCII Profibus-DP, CANopen, etc. |
| Position control (fixed length, or angular positioning) | × | √ |
| Field weakening control | × | √ |
| Autotune online | Online | Online & Offline |
| Short-time ramp-up | Trip | No trip |
| Customized features (software and/or hardware) | Unprocurable or no experience | Procurable with rich experience |
Packaging and logistics
All drives are well packed before shipment, fit for air shipment, sea transportation, and express delivery. Customers are able to call its own nominated forwarder or consult GTAKE logistics department for worldwide shipment services.
* Low-power inverters are packed in cardboard box, and others are in plywood cases.
* Plenty of transportation procurable globally in accordance with customer demand or GTAKE expertise.
GTAKE AC motor drives are able to replace AC drives and inverters of the following brands: , LS, Toshiba, Siemens, Lenze, Yaskawa, Mitsubishi, Delta, Hitachi, WEG and etc.
Please leave us an inquiry for more details of our frequency inverters, like information of the model numbers, technical data, applicable application, pricing, distributor policy, lead time and/or customized functionality.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier