Transparent -Reflex Glass water Level Gauge or level gage

Reflex Glass Level Gauge

Bi-color Sight glass level gauges

Transparent Flat Glass Level Gauge

Reflex Flat Glass Level Gauge

Defrost type

Weld Pad Flat Glass Level Gauge

Visual level indicator tube bypass

Transparent Tubular Level Gauge

Transparent -Reflex Glass water Level Gauge or level gage

Material:

·         Carbon steel

·         1Cr18Ti9Ti

·         Stainless steel

·         Other material negotiable

Choices:

1.       high temperature

2.       high pressure

3.       defrost level Gauge

4.       reflex Level Indicator

5.       transparent

6.       boiler flat type

7.       single color or bi-color;

8.       sight glass

9.       Illuminator

General introduction

TBS glass plate liquid water level gauges are level measuring instrument. Upper and lower needle switches and indicating equipments are their main components. Fluid flows via switch into th indicating equipment, then the liquid level will display clearly viewed through the range of effective light transmission. And on that basis, we have developed double color glass sheet liquid level gauges, defrost glass sheet liquid level gauges and steam thermal glass sheet liquid level meters to adapt to different places and different conditions.

About sight glass plates’s glass quality, only borosilicate glass is used. The connection to the process is generally made with valve heads with single or double isolation. Drain valves enable the sight glass indicator to be emptied and are fitted to the lower flange face. If necessary, a vent valve can be fitted at the top.

1, TBS-A type transparent liquid level gauges

1) Measure range: 500~1700mm

2) Working temperature: ≤250

3) Working pressure: ≤4MPa

4) Meter material: qualitative carbon steel or 1Cr18Ni9Ti

5) Transmit color: nature color

2, TBS-B type double color glass sheet liquid level gauges

1) Measure range: 330~440mm

2) Working temperature: ≤250

3) Working pressure: ≤4MPa

4) Meter material: qualitative

Carbon steel or 1Cr18Ni9Ti

5) Transmit color: nature color

3, TBS-C type defrost glass sheet liquid level gauges

1) Measure ranges: 300~2000mm

2) Work temperature: -40~60

3) Working pressure: ≤4MPa

4) Needle switch close

Automatically pressure: ≥0.2MPa

5) Defrost pin height: 100mm, 150mm, 200mm, the lower the temperature the higher the pin.

6) Flange material: qualitative carbon steel or 1Cr18Ni9Ti

4, TBS-F type reflective glass sheet liquid level gauges

1) Measure ranges: 300~2000mm

2) Work temperature: 0~250

3) Working pressure: ≤4MPa

4) Needle switch close automatically pressure: ≥0.2MPa

5) steam insulating sheath pressure: ≤0.6MPa

6) flange material: qualitative carbon steel or 1Cr18Ni9Ti

5,TBS-S type windows glass sheet liquid level gauge

1) Light transmission size: 18×304mm

2) Working pressure: ≤1.0Mpa

3) Working temperature: ≤250

4) Jointing size: 80×366mm

5) meter face material: qualitative carbon steel or 1Cr18Ni9Ti

Transparent -Reflex Glass water Level Gauge

Magnetic Float Level Gauge

Easy to install, no extra piping required in most applications
Magnetic water level gauge Visual level indication up to 30m, sections made suit for delivery. Magnetostrictive level indicator can reach 30m measure range with cable insertion.
Ideal for high-temperature, high-pressure and corrosive applications.
Magnetostrictive and radar transmitter options for non-invasive and/or redundant level control.
Available with HART, 4~20mA, and level switches.

U-ideal mounting styles



Typical pictures of magnetic level indicators

Model Selection Table
Basic selection of magnetic level indicator please refer to the following steps:

Remark: Manufactured customized is available for this product.
Can be made to Sections if gauge is longer than 3m to make suitable for delivery.

Special working conditions magnetic level gauge
UHC - V side-top mounted high viscous liquid Float level gauge

UHC - V side-top mounted high viscous liquid type Float level gauge is suitable for the petrochemical tank liquid level measurement system, and especially suitable for heavy oil, tar, crude oil, resin of high viscosity medium liquid level detection. 
Features:
C-C: 500 ~ 10000 mm, long gauge can be section made.
Process connection: size DN6 ~ DN200, flange standards (GB, JB/T, HGJ, ANSI, DIN, etc).
Lead tube material: 304SS; 316SS; 316L
Float material: 304SS; 316L, Titanium
Working pressure: 0 ~ 1.6 MPa
Working temperature: - 20 ~ 200 ºC
Accuracy: + / - 10 mm
Medium density: 0.65 ~ 2.0 g/cm3
Medium viscosity: 1.5 Pa s. or less
Model Selection:

Top mounted vaporizing fluid float water level gauge
UHC -T Top mounted vaporizing fluid special using magnetic float level gauge is suitable for liquid measurement which is easy vaporization in pressure vessels, especially for buried tank of liquid level measurement such as liquefied petroleum gas, methane. This model level gauge adopts of a set of three pure titanium floats and unique guide rail structure, with stable and reliable product performance, strong practicability, now is widely used in LPG stations.
Features:
Measuring range: 300 ~ 3000 mm. 
The process connection: flange size is 6 ~ DN200, flange standards (GB, JB/T, HGJ, ANSI, DIN, etc) please declare when ordering.
Lead tube material: stainless steel 1Cr18Ni9Ti; 304SS; 316SS; 316L
Float material: Titanium
Working pressure: -0.1 ~ 4 MPa
Working temperature: - 80 ~ 80 ºC
Accuracy: + / - 10 mm
Medium density: 0.4 ~1.2 g/cm3
Medium viscosity: 0.4 Pa s.
 
Model Selection: