Transformer accessories oil tank bushing parts of transformer
Summary
220kv 110kv and 66kv low-loss series transformer is our independently developed new generation of transformers on the basis of absorption of domestic and foreign advanced technology, which feature low local discharge, low loss, low noise, high reliability, strange protection against abrupt short circuit. Its excellent performance has been recognized by wide users and highly appraised by experts.The full-sealed suspending-cover free products sell well nationwide.
Reliable Structure
Amount of local discharged:The apparent discharge amount is less than 80pC under the 1.5 times of rated voltage;
Noise: Products of 63MVA and below is lower than 58dB(AN);
Power loss: no-load loss is 30% lower than that of IEC standard;
Reliability: All in-service product have no damages or oil leakage occurred;
Short circuit withstanding: Model SFZ11-50000/132 smoothly passed the short-circuit withstanding test of the national transformers quality supervision and inspection center and also passed Holland “KEMA” quality Control system.
Excellent Materials
Oxygen-free copper lines of lower resistivity, which will become smoother and burr-free after series of additional surface treatment, so the load loss of our transformer is lower and the electric performance is better.
High-quality silicon-steel plates which are of lower unit loss, and the no-load of the transformers is lower.
High-quality wooden laminating insulation pieces, which won’t split or move even under the influence of short circuit.
Thoroughly filtrated transformers oil containing less water, gas and impurities, which makes our transformers work better.
High-quality rubber sealing material, which can prevent the transformers form aging or leakage.
Coil
The high-voltage(HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed. All stays and pads are chamfered to keep highly reliable insulation.
2. In the transformer winding there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation. The HV and MV regulation system are independently provided with voltage-regulating winding to balance the ampere turn of each winding-up,effectively lower the axial electrodynamic force generated at short-circuit of transformer and improve abrupt short-circuit withstanding capacity.
Rated Power(kVA) | High Voltage | H.V. Tap range | Low Voltage(kV) | Short-Circuit Impedance(%) | No-load Loss(W) | On-load Loss(W) | No-load Current | ||||
Type 9 | Type 10 | Type 11 | Type 9 | Type 10 | Type 11 | ||||||
31500 | 220 242 | ±8×1.25% ±8×1.5% | 6.3, 6.6 10.5, 11 13.8, 15.75 18, 20 35, 38.5 | 12~14 | 35 | 32 | 28 | 135 | 128 | 128 | 0.7 |
40000 | 41 | 37 | 33 | 157 | 149 | 149 | 0.7 | ||||
50000 | 49 | 44 | 39 | 189 | 180 | 180 | 0.65 | ||||
63000 | 58 | 52 | 46 | 220 | 209 | 209 | 0.65 | ||||
75000 | 67 | 60 | 54 | 250 | 238 | 238 | 0.6 | ||||
90000 | 77 | 69 | 62 | 288 | 274 | 274 | 0.55 | ||||
120000 | 94 | 85 | 75 | 345 | 328 | 328 | 0.55 | ||||
150000 | 112 | 101 | 90 | 405 | 385 | 385 | 0.5 | ||||
160000 | 117 | 105 | 94 | 425 | 404 | 404 | 0.49 | ||||
180000 | 128 | 115 | 102 | 459 | 436 | 436 | 0.46 | ||||
240000 | 160 | 144 | 128 | 567 | 539 | 539 | 0.42 |
1.Please simply state the type, size, quantity, delivery date and delivery methods for the product.Technical specification attached is preferred.
2. If the customer has no special requirements,the type and capacity will follow our standard configuration.
3.Wiring scheme, electrical schematic diagram and the requirements of the device and the original device are required.
The standard procedure for making wooden case is as follows:
Safe Robust Eco-friendly Tempetature-resistant Economical
Our products meet the requirements of national and international standards. This has been confirmed by comprehensive type tests according to the latest IEC and ANSI standards.
Our Turnover & Exhibitions in the Past Few Months
Daelim is rich in international power projects. With the excellent team, Daelim can offer the best solution and top valued equipment according to the project. Moreover,Daelim can provide good service such as design, integration, installation, engineering test, inspection and so on, which help customers to be more competitive in the global projects.
The following picture are some of the projects we built in the past,which simultaneously shows the competence of Daelim.