Transfer Paper for laser printer metallic silver or gold laser transfer paper

Metallic laser transfer paper is used to transfer on heat resistant and hard surfaces objects. It can be used on flat object
transfer, such as ceramic tile, metal plate, glass, wood board, etc., It also can be used on cups or mug.

Samples
We provide free sample for your test , and the shipping cost is payed by your side ( W.U or Paypal )
Sample will be sent within 2-3 days after we receive your payment .

PAYMENT

Notice 

1.For the flat object, the surface must be smooth and flat. When fixing the paper, fix the edge and the middle part
together. 

2.For the pattern design, simple and single color is better. Transferring letters, lines, logos, simple patterns and so
on is more suitable. 

3.For the printing: select colored laser printer, mirror image printing and label type. 

4.For cooling and peeling, peel the paper after it is completely cooled. To accelerate the cooling process, you can put it into cold water after it is cooled down naturally for a while. Do not immediately put it. 

5.For the gold or silver powder remained on the transferred object, put it into the water to make it a little wet, then wipe them with wet cloth. Do not wipe hard. 

6.For flat object transfer, temperature and time: 180 °C, 180 S, moderate pressure,cold peeling. Place the object with the image paper on the silicone pad (for the easy-to-fragile objects, use a heat resistant foam pad ). With the transfer side facing up, place a heat resistant soft silicone pad on it (or a piece of elastic cloth). Then place a piece of heat resistant oil paper to transfer it.

7.For baking temperature and time: the tile, cup and metal 210-220 °C, 5 minutes. 8.For the material which could not endure high temperature, adjust them flexibly in the actual operation. The principle is not to exceed the maximum temperature that the object itself can withstand. Large items that are inconvenient to be placed in the oven can be dried naturally.