Traffic anti-skid reflective pavement marking Tape adhesive road marking tape
Road marking tape are Embedded micro glass beads both on surface and body and has a durable,reflective & skidproof effect. Designed to stripe asphalt parking lots,roads,bike paths and any other area where the road will subject to heavy traffic flow and high visibility delineation is needed.
Item No. |
Description |
Specification |
||
Thickness (mm) |
Length/roll (m) |
Width/roll (cm) |
||
NYH-BXD10 |
Preformed Permanent Pavement Marking Tapes is made of polymer, pigments and reflective micro glass beads. Two type: reflective surface with self-adhesive backing or non self-adhesive backing; It is characterized by high skid-resistance, high durability and excellent reflective visibility.it can be made into different kinds of marking belt, arrowhead, word, and pattern |
1.2-2.2 |
40,50,60,70 |
10,15,20,25,30,35,40,45,can be customized |
NYH-BXD11 |
Preformed Permanent Pavement Marking Tapes is made of polymer and pigment. Two type: self-adhesive backing or non self-adhesive backing; Characteristic: no micro glass beads on the surface keep the surface very smooth surface. So, it can be cleaned up easily. It is applicable to indoor pavement or place with heavy dust. |
1.0-2.0 |
40,50, |
10,15,20,25,30,35,40,45,can be customized |
NYH-BXD20 |
Preformed Temporary Pavement Marking Tapes is made of polymer, pigments and reflective micro glass beads. Two type: reflective surface with self-adhesive backing or non self-adhesive backing; Temporary Pavement Marking Tapes is applied for temporary road construction
It is easy to install and stick. It has strong trampling-proof capability when be applied indoor. It is applicable to indoor pavement or place with heavy dust. |
0.5-0.7 |
40,50 |
|
NYH-BXD21 |
Preformed Permanent Pavement Marking Tapes is made of polymer, pigments and reflective micro glass beads. Two type: reflective surface with self-adhesive backing or non self-adhesive backing;
It is characterized by high skid-resistance, high durability and excellent reflective visibility.it can be made into different kinds of marking belt, arrowhead, word, and pattern |
1.2-1.4 |
40,50,60 |
|
NYH-BXD30 | Pavement Marking Signs | 1.5-2.5 | 1m*1m | |
NYH-BXD31 | Pipe Marking Label | 1.8-2.5 | 10cm*15cm/8cm*12cm | |
NYH-BXD32 | Personalized and colorful Zebra Crossing | 1.8-2.5 | ||
NYH-BXD33 |
Preformed 3D Markings |
1.5-2.5 |
Arrow:300,600,900cm |
Introduction:
Road Reflective Marking Tape is embedded into micro reflective glass beads both on surface and body and has a durable,reflective and skid-proof effect. Designed to stripe asphalt parking lots,roads, bike paths and any other area where the road will subject to heavy traffic flow and high visibility delineation is needed.
Features:
1 .Reflective marking tape takes double layer compound structure and is characterized by high skid-resistance, excellent reflective visibility, vibrant color and the like. Furthermore, it can be made into different kinds of marking belt, arrowhead, word, and pattern
2 .Both of these two types can be quickly and easily applied to clean, dry, asphalt or concrete surfaces
3.High retro-reflectivity all day long ; anti-skid ; high tensile ; strong weather resistance ; easy application
Performance Life:
The performance life of pavement markings will depend on the following:
* Traffic conditions; Snow removal practices; Pavement surfaces; Application techniques.
*It is recommended that each customer thoroughly evaluate LUDWAY Pavement Marking Tapes under the conditions in the specified location. While experience has shown that when properly applied, these materials are highly effective traffic control devices, LUDWAY Technologies makes no generalized performance claims.
Standard Dimension :
1. Standard length: 40m , 50m , 60m , 70m
2. Standard width: 15cm, 20cm, 25cm, 30cm, 35cm, 40cm, 45cm, 50cm; or according to customer's requirements.
3. available color: white, yellow, black, red, blue
Installation Example:
Application:
Road marking tape is applied in all kinds of pavement, such as: concrete, asphalt, marble and so on. The marking tape with adhesive on the backing, can be peeled the paper from the material, stick it on the ground directly (indoor or the road without truck crushes). Also it's mainly used for temporary road marking or change the route. It can be used for safety island, balustrade, parking as a warning sign. The advantage of the product is simple, easy, long life, it widely used for factory, supermarket, airport, toll station, square and etc.
Zibo Xin Yuan Hui Traffic Facilities Factory was founded in 2002. We specialize in production, research and developing plastic & rubber material applied to road traffic safety and parking lot industry. We are committed to providing the best quality of road studs, road marking tape, rubber speed bump & hump, traffic cone, delineator post, guide post, traffic safety barricade, wheel stopper, wall protector, corner guard, etc. Meanwhile, we accept OEM and ODM service since our R&D team has more than 12 years working experience and provide strong technical support.
At beginning, our factory produces good quality product and export through foreign trading company. In order to explore international market and expand market coverage area, we decide to establish international trade department by ourselves and export directly to oversea market.
With an advantage of own mould workshop, we are in a position to have more competitive mould quotations for producing customized mould to meet client’ requirement about road traffic safety products .We have great confidence and experience in producing goods as per clients special design . Innovation and diligence make us keep up with times and go forward. Warmly welcome customers all around the world come to China to visit our factory at your convenience.
Our company is guided by “Quality Oriented and keep improving, customer first and
Best service”. In our business practice, we strive for a win-win result with our customers based on the principle of mutual benefit and reliable after-sales service.