TraceTek TT1000 leak detection cable detects the presence of water at any point along its length.
Cable Diameter | 0.24 in (6.0 mm) nominal | ||||
Continuity and Signal Wires | 2 x 26 AWG with fluoropolymer insulation | ||||
Sensing Wires | 2 x 30 AWG with conductive fluoropolymer jacket | ||||
Core | Fluoropolymer | ||||
Cable weight (50 ft/15 m length) | 2.3 lb (1 kg) | ||||
Cable color | High-visibility yellow |
Breaking strength | Cable only: 160 lb (72 kg) Including connectors: 70 lb (32 kg) | ||||
Cut-through Force | >50 lb with 0.005 (>22 kg with 0.13 mm) in blade; crosshead speed 0.2 in/min | ||||
Abrasion Resistance | >65 cycles per UL 719 | ||||
Maximum Continuous Operating Temperature | 174°F (75°C) | ||||
Fire Resistance | Meets the requirements of NFPA 262 “Standard Method of Test for Flame Travel and Smoke of Wires and Cables for use in Air-Handling Spaces” |
TraceTek TT1000 sensing cables are approved for installation in ordinary and hazardous areas when used in conjunction with approved TraceTek monitoring equipment and zener safety barriers when appropriate.
All TraceTek sensing cables are designated as “simple apparatus” and included in the approval certification for TraceTek monitoring instruments.
Consult the specific data sheets and approval certificates for the TraceTek TTSIM-128, TTSIM-1, TTSIM-1A, TTSIM-2, TTC-1 and TT-FLASHER-BE for application limitations and specific area approvals and certifications.