HTM-3Z/3L Type N Fold Towel Paper Machine
- Cylinder Width: Max. 880mm
- Raw materiel size:720mm
- Processing capacity:500-600 sheets/min
- Folding sheet length (fixed): 225mm
- Towel unfold: 225×(210~240) mm
- Towel fold: 75±2mm*(210~240) mm
- Three Lines of production
- Folding type – N folding
- Embossing unit: steel to steel single embossing
- Unwind Stand Unit:
1. Width of parent paper:720mm
2. Max diameter of parent paper:1200mm
3. Core inside diameter:76.2mm
4. One paper rolls drived by independent motor.
5. Parent roll axes regulation:manually
6. One unwinding shaft, include kinetic taper sleeve and locating sleeve.
7. Panel structure, thickness is 20mm.
- Transmission:
1. Transmissions are all by gear and simultaneous belt.
2. Folding roller,cutter roller etc the brand of bearings of main parts are “HAERBIN”,”WAFANGDIAN”.
3. Mounted bearing is “LK” brand.
- Control Unit:
1. Speed adjusted:controlled by SIMENS inverter, with SIMENS PLC and touch screen.
2. Counting system:counter adjusted
3. Jogging button and emergency button installed on machine
4. Electrical control
1) Disconnecter, protection switch electromagnetic contactor is used brand TianZheng\ZhengTai.
2) Control buttons is Schneider.
3) Relay is used OMRON.
4) Proximity switch is TAIWAN brand YANGMING
- Air-operated control:
1. Air cylinder,air valve are famous brand of China.
2. Air pressure:> 4kg/cm2 (provided by buyer)
- Counter for the batch quantity production
- Emergency stop / manual move system
- Control Panel to be movable , and installed on the machine
- Power: 15KW VACCUME PUMP (Taiwan brand), Mail motor: 4KW
Voltage: 3PHASE 380V/50HZ