Toroidal Transformer 6000W 230VAC 24/48VDC Pure Sine Inverter with Battery Charger
Model | 1012E | 2024E | 3024/48E | 4024/48E | 5024/48E | 6024/48E | ||
Rated Power | 1000W | 2000W | 3000W | 4000E | 5000W | 6000W | ||
Transfer time | Typical 10ms | |||||||
Invert mode |
| |||||||
| Norminal output volt | 120Vac/230Vac(100Vac~120Vac;200Vac~240Vac) | ||||||
Output frequency | 50Hz+/-0.3Hz;60Hz+/-0.3Hz | |||||||
Output wave | Pure Sine Wave | |||||||
Output overload | 105%<load<120%+/-10%:Fault(turn off output after 10s) 120%<load<150%+/-10%:Fault(turn off output after 3s) 150%<load+/-10%: Fault(turn off output after 1s) | |||||||
Short circuit protection | Software protection | |||||||
Norminal efficiency | >88% | |||||||
Power Factor | 0.9~1 | |||||||
Line mode |
|
| ||||||
| Input voltage range | Narrow range | Wide range | |||||
Norminal output voltage +/-15% | Norminal output voltage +15%,-23% | |||||||
Input frequency | 40~70Hz | |||||||
Input Wave form | Sine wave(Utility or generator) | |||||||
Short circuit protect | Circuit breaker | |||||||
Output overload | 120%<load<150%+/-10%:Fault(turn off output after 60s)
150%<load+/-10%: Fault(turn off output after 1s | |||||||
Over charge protect shutdown | 16V for 12V(*2 for 24V,and *4 for 48V) | |||||||
Efficiency online | >95% | |||||||
AC charge | Charge current can be set(5A down/up setting) | |||||||
Selection of battery charging voltage type | ||||||||
Battery type | Fast V | Float V | ||||||
Gel U.S.A | 14.0V | 13.7V | ||||||
A.G.M1 | 14.1V | 13.4V | ||||||
A.G.M2 | 14.6V | 13.7V | ||||||
Sealed lead acid | 14.4V | 13.6V | ||||||
Gel euro | 14.4V | 13.8V | ||||||
Open lead acid | 14.8V | 13.3V | ||||||
Calcium | 15.1V | 13.6V | ||||||
De Sulphation | 15.5V for 4 hours then off | |||||||
Lithium | 14.7V | |||||||
Other | User-defined | |||||||
battery |
|
|
|
|
|
| ||
| Input | 12V | 24V | 24V/48V | 24V/48V | 24V/48V | 24V/48V | |
Voltage range | 12V(10V~16V)+/-0.3V;/*2 for 24V/*4for 48V | |||||||
Low DC warning volt | 12V(10.5V+/-0.3V);/*2 for 24V/*4for 48V | |||||||
Low dc cut-off volt | 12V(10V+/-0.3V);/*2 for 24V/*4for 48V | |||||||
Other |
|
|
|
|
|
| ||
Operating temp range | 0~40℃ | |||||||
Humidity | 0~95% | |||||||
Noise | <50dB | |||||||
Dimension(mm) | 422*217*210 | 574*345*197 | ||||||
|
|
|
|
|
|
| ||
Feature:
·Pure sine wave Inverter
·Output power factor 1
·Selectable charging current via LCD
·Selectable input voltage range for home appliances and personal computer
·Configurable AC/battery input priority Via LCD setting
·Configurable power saving mode via LCD setting
·Compatible with generator power
·Dry contact port generator to realize mutual control by generator and utility
·Auto restart when AC is recovering
·Overload and short circuit protection
·Small battery charger design for optimized battery performance
·Cold start function
·Smart fan running control to extend service life and reduce noise
·Support to run Lithium battery
·RS232 communication port and remote control panel optional
·Single phase 110Vac or 220Vac and split phase 110Vac/220Vac optional