Type | Model |
Diameter inch |
Salt rejection (%) |
Product Flow Rate gpd(m3/d) |
Membrane Area ft2 (m2) |
Feed Spacer Thickness (mil) |
Test Condition |
High salt rejection rate | TM710 | 4 | 99.7 | 2400(9) | 87(8) | 31 | 2000mg/L NaCI, 225psi, 25°C, pH7, Ry15% |
TM720-370 | 8 | 99.7 | 9500(36) | 370(34) | 31 | ||
TM720-400 | 8 | 99.7 | 10200(39 ) | 400(37) | 31 | ||
TM720-430 | 8 | 99.7 | 11000(42) | 430(40) | 28 | ||
TM720N-400 | 8 | 99.7 | 10200(39 ) | 400(37) | 34 | ||
High anti-chemcials | TM720D-400 | 8 | 99.8 | 11000(42) | 400(37) | 34 | |
TM720D-440 | 8 | 99.8 | 12100(45 ) | 440(41) | 28 | ||
High Boron rejection |
TM720C-430 | 8 |
99.2 (95 boron) |
8800(33) | 430(40) | 28 | 2000mg/L NaCI, 150psi, 25°C, pH10, Ry15% |
Ultra-low pressure | TMG10 | 4 | 99.5 | 2400(9) | 87(8) | 31 | 500mg/L NaCI, 110psi, 25°C, pH7, Ry15% |
TMG20-370 | 8 | 99.5 | 9500(36) | 370(34) | 34 | ||
TMG20-400 | 8 | 99.5 | 10200(39) | 400(37) | 28 | ||
TMG20-430 | 8 | 99.5 | 11000(42) | 430(40) | 28 | ||
Extreme Ultra-low pressure | TMH10A | 4 | 99.3 | 2400(9) | 87(8) | 31 | 500mg/L NaCI, 100psi, 25°C, pH7, Ry15% |
TML 20-370 | 8 | 99.3 | 10200(39) | 370(34) | 34 | ||
TML 20-400 | 8 | 99.3 | 11000(42) | 400(37) | 28 | ||
TMH20A-430 | 8 | 99.3 | 11800(45) | 430(40) | 28 | ||
Anti-fouling | TML10 | 4 | 99.7 | 1850(7) | 87(8) | 34 | 2000mg/L NaCI, 225psi, 25°C, pH7, Ry15% |
TML10F | 4 | 99.7 | 2200(8 ) | 87(8) | 31 | ||
TML20-370 | 8 | 99.7 | 9500(36) | 370(34) | 34 | ||
TML20-400 | 8 | 99.7 | 10200(39) | 400(37) | 31 | ||
TML20N-400 | 8 | 99.7 | 10200(39 ) | 400(37) | 34 |
Toray 4040 Reverse Osmosis Membranes
TMG10
TM710
TML10
WHAT IS THE EXPECTED LIFE OF THE MEMBRANES?
Generally, the life of the membranes depends on the water quality but in normal cases or under standard parameters,
you can expect 1.5 to 2 years for domestic and approximately, 3 years for commercial and industrial elements.
HOW TO PROCURE YOUR MEMBRANE?
We have different channel partners and worldwide set up of our dealer network but we suggest you to contact our
direct representatives to guide you to the proper channel, to have you find your value procurement.
WHAT ARE THE DIFFERENT SIZES MANUFACTURED BY HI-TECH?
We manufacture every range of wet and dry membrane elements flow rate from 50-600 GPD for residential.
HOW IS RTL MEMBRANE DIFFERENT FROM OTHERS?
We offer value against your money, prices which are comparatively lower, performance equivalent to best
membranes available and with higher longevity.