Strong silicone bra adhesive | |||||||
Model No.: KL-6634A/B | |||||||
Method of application: | |||||||
• Surface treatment:The base material though chemical treatment with the solvent , cleanup greasy and dirt. • Coating: After mixing AB two-component evenly, use the way of brushing or dipping, spraying or screen printing. • Drying condition:Baking at 80°C for 10 minutes • Storage:Bonding sooner after coating,1 day is the best, and maximum 3 days if storaged at a no pollution and no high temperature humidity air place. • Vulcanizing:Unvulcanized silica gel though pressuring die casting with base material in high temperature or vulcanizing bonding under hot air. |
|||||||
Tips: | |||||||
• Store in dry shade about 25 degrees Celsius, and far away from heat and frame. | |||||||
• Solvent is volatile, please cover the container tightly when it is done. | |||||||
• The workplace should be ventilated and avoided fire. | |||||||
>>> Typical Properties Data |
Model No. | Feature | Ratio | Hard-ness (°A) |
Rotating Viscosity (mpa.s) |
Solidity | Curing Condition (tc10) |
Curing Condition (tc10) |
Tensile strength MPa |
Elong-ation % |
Tear strength KN/M |
Peeling ratio at 90° | Transm-ittance | Refra-ctive index | Application |
KL-2600AB | Silicone glue for PET | 1:1 | 3.5 | 50000 | 85% |
19S* 130°C |
42S* 130°C |
1.81 | 929 | 2.4 | 10±1 | 92% | 1.41 | self-adhesion, no need primer coating |
KL-2606AB | Silicone adhesive for PET | 1:1 | 35 | 35000 | 85% |
19S* 130°C |
42S* 130°C |
2.55 | 900 | 2.97 | 10±1 | 92% | 1.41 | High transparent and self-adhesion, no need primer coating |
KL-2610AB | Silicone adhesive for PET | 10:1 | 35 | 50000 | 85% |
19S* 130°C |
42S* 130°C |
1.81 | 929 | 2.4 | 10±1 | 92% | 1.41 | High transparent and self-adhesion, no need primer coating |
KL-2616AB | Silicone adhesive for PET | 10:01 | 35 | 35000 | 85% |
19S* 130°C |
42S* 130°C |
2.55 | 900 | 2.97 | 10±1 | 92% | 1.41 | High transparent and self-adhesion, no need primer coating |
KL-2634AB | Silicone adhesive for PET | 1:1 | 2 | 30000 | 65% |
17S* 130°C |
40S* 130°C |
0.71 | 300 | 1.07 | 10±5 | 94% | 1.41 | PET pressure sensitive adhesive for optical film, self-adhesion |
KL-6600AB | Silicone adhesive for PET | 1:1 | 35 | 10000 | 100% |
19S* 130°C |
42S* 130°C |
1.81 | 929 | 2.4 | 10±1 | 94% | 1.41 | PET optical film liquid silicone |
KL-6620AB | Silicone adhesive for PET | 1:1 | 20 | 20000 | 100% |
19S* 130°C |
42S* 130°C |
1.81 | 929 | 2.4 | / | 90% | 1.41 | Liquid silicone adhesive for stones and glass |
KL-6634AB | Silicone adhesive for PET | 1:1 | 3.5 | 50000 | 100% |
17S* 130°C |
42S* 130°C |
0.71 | 300 | 1.07 | 10±5 | 94% | 1.41 | PET pressure sensitive adhesive for protective film, self-adhesion |
KL-6630AB | Silicone adhesive for PET | 1:1 | 35 | 50000 | 100% |
17S* 130°C |
40S* 130°C |
0.71 | 300 | 1.07 | 10±5 | 94% | 1.41 | Specialized liquid silicone for post forming |
>>> Application