Top Quality SPC Ceramics Tile Floor Adhesive Waterproof
DIMEI Family
2. Concrete Road Wall Gap Expandable Joint PU sealant
3. Acetic and Neutral Silicone Sealant
6. Bus body/GP/Glass PU Sealant
| Product Name | MS Polymer sealant |
| Material | Modified Silane |
| Color | Black/White/Grey |
| Shelf time | 12months |
| Density | 1.23/1.46/1.48/1.20/1.45/1.60/1.28 |
| Tack-free time | 5-30minutes |
| Curing speed | 3-4mm/24hour |
| Package | 310ml cartridge/600ml sausage/5-10kg per tank |
| EINECS No. | 215-535-7 |
| Application field | construction,packing,transportation,woodworking, other (automobile) |
| Brand Name | DM |
Top Quality SPC Ceramics Tile Floor Adhesive Waterproof
Features & Advantages
l With good elasticity.
l Odorless, low VOC, PVC free, safe to use.
l Good resistance to cold and hot weather alternation, over 10 years of service life.
l After curing, the shrinkage rate is very low, and the leveling property is moderate, which can fit well with the bonding surface.
l It can be applied for the sealing of all kinds of floors with ground, with good sound insulation and shock absorption.
l Low temperature resistance, in the range of -40 ℃ ~ 90 ℃, can maintain good flexibility and adhesion.
l No primer required.
Typical applications
DM233 is suitable for the elastic sealing of most substrate joints, including stainless steel, aluminum, copper, PVC, polyester, ceramics,
wood, coating, etc. However, it does not apply to PPP and TFE materials. In the decoration industry is widely used in the construction of various floors.
Application area
l Bonding, sound insulation and shock absorption of floor and ground in the decoration area.
l Bonding of container wood floor and the compartment.
Application tips
l The bonded surface must be clean, dry and free of putty before bonding.
l Substrates that may seep out of oil are not suitable for direct application of sealant.
l For rusted or corroded metal surfaces (such as aluminum oxide, copper, iron oxide rust surface), in order to ensure the bonding effect, the rust on the surface layer needs to be worn off before coating.
l Due to the construction environment, construction methods, and material differences, pre-testing is required before use to ensure adhesion performance.
l The optimal coating temperature is +15 ~ +40°C. When the temperature is low, the extrusion resistance increases, warm up the adhesive before use.
TDS
Indicator | Parameter |
Color | White, other colors customized |
Outer appearance | Paste |
Density, g/cm³ | 1.45±0.03 |
Consistency | 7.7±0.2 |
Hardness, Shore A | 45±2 |
Extrusion. ml/min | ≥150 |
Sag rate, mm | 2 |
Surface dry time, min | 25-40 |
Curing speed, mm/24h | 3.0-5.0 |
Peel adhesion, Cohesive destruction, % | ≥70 |
Elongation at break, % | ≥400 |
Tensile Strength, Mpa | ≥1.0 |
Breaking strength, Kn/m | ≥10 |
Test under situation: 23℃×50%RH×28days
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier