Titanium dental implants reciprocating bearing handpiece spindle

Dental handpiece Features:

1.The handpiece head can be disassemble for easy cleaning.

2.Button type chuck.

3.Internal and external irrigation system.

4.Provides sufficient force at low speed.

5.Max torque 55Ncm

6.Ergonomic comfort grip

7.20:1 gear ratio

8.Reasonable price and excellent performance.

9.This handpiece is compatible with all e-type motors.

10.compatible with (NSK,Aseptico,W&H,Nouvag Acteon)

Dental implant handpieces right use way:

1. The need to use a clean , dry , oil-free air compressors for medical use ;

2. The air pressure between 2.3-2.8kgf / cm2;

3. Place the adapter with quick connector at the bottom of a combination of dental handpieces , and confirm that the card lock fixed ;

4. Press the pedal , handpiece operation and examine whether the normal operation of the spray head . If everything is normal, you can start using the handpiece.

After each patient use , maintenance should be done as follows

1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate ;

2. Use a metal needle to clean the spray holes and fumaroles ;

Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle.

3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes ) ;

4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom ;

5. The handpiece with quick connector combination ( first determine the water switch is turned off )

6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie ) ;

7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain ;

8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization.