Titan Airless Spray gun Spray Tips

Yanfeng RACO5 SwitchTips SwitchTips are high performance tips and the most widely used on the Market. SwitchTips can be used for residential and commercial applications, with a large selection of tip sizes available. Yanfeng RAO SwitchTips also include 1 OneSeal for most common coatings, and are quick and easy to change Can be used with most airless paint sprayer brands. Key Applications：

Question:Will this work for spraying stains? It's very thin, almost like water. Answer:Yes I just bought this tip to spray my fence. It worked great. Just make sur you adjust the pressure on your sprayer to get a nice pattern going Question:How is this different from a graco true airless 411 tip that is labeled "411" instead of "do4g 221"? Answer:If I am understanding your question correctly, you are mainly asking the difference between a "211" tip and a "411" tip, correct? The first digit of these 3 number sequences (for a 211, the number "2", for a 411 the number would be "4", for a 511 the number would be "5" and so on...) refers to fan width and is one-half the size of the working fan width, so if you double the first number it will tell you in inches what the tip's approximate fan spray width will be if you were to hold the spray gun about one foot from the surface to be sprayed. On a 211 tip (double the "2") which gives you an approx fan width of 4 inches. A 411 tip would be about 8 inches, a 511 would be about 10 inches, and so on... The last two digits (in the above examples would be "11") is the orifice opening measurements in thousandths of an inch. So in all of the above examples the number is "11" which would mean that they all have an orifice opening of 11 thousandths of an inch (0.011") hence the number "11" (211, 411, 511 etc...) Just for practice, a 311 would give a fan spray of about 6 inches with 11 thousandths spray tip opening. Now try a 619 tip (12 inch fan with a 0.019" opening). A 521 would be a 10" fan spray with 021" orifice opening. Now that you have the basics of tip numbers, below you will find general recommendations from Graco regarding which tip size and color coding to use to best suit your needs. Question:Does this part also come with the Gaskets and seals ? Answer:Its come ready to work..!!!! Question:Does this tip fit the Graco magnum x5? Answer:Yes. Any RAC IV tip with a 0.015 inch orifice or smaller. Thanks.