Tilt Camera Lens Mount Adapter Ring for Nikon to Lens to Olympus Panasonic Micro 4/3 M4/3

Tilt Camera Lens Mount Adapter Ring for Nikon to Lens to Olympus Panasonic Micro 4/3 M4/3

Features

This FOTGA Lens Mount Adapter, you can mount for Nikon AI, NON AI, AIS, F, AF mount lenses to be used on Olympus Panasonic Micro Four Third Mount M4/3 camera body. It allows you tilt your lens to change the depth of field just as an expensive tilt lens.

Diaphragm control of the lens is set manually.

It can be especially used with other adapter to expand its usage on other lens to experience the effect brought by tilt lens.

It tilts from 0 to 8 degrees – and rotates 360 degrees.

Allows focus infinity.

Made of Brass and Aluminum, With perfect surface finishing, Super Precise Design

Notice

Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other function will not operate correctly while using this adapter.

In this case "Stop-down mode" will need to be used when metering since the lens doesn't have the ability to have its apeture controlled by camera body. You can shoot with manual mode or apeture priority mode.

Suitable for

Micro 4/3 camera, e.g.

for Nikon F Mount Lens.

for Olympus Pen E-P1, E-P2, E-P3, E-PL1, E-PL2, E-PL3, E-PM1 etc. Camera.

for Olympus M5 Camera.

for Panasonic Lumix DMC-G1, DMC-G2, DMC-G3, DMC-G5, DMC-G6, DMC-G10, DMC-GH1,DMC-GH2 etc. Camera

for Panasonic Lumix DMC-GF1, DMC-GF2, DMC-GF3, DMC-GF5 etc. Camera