Three phase four line detection GSM power alarm system power failure security system power failure alarm 220v

Bai Ling GSM transformer /power failure alarm (BL3000G)   

Three phase four line detection GSM power alarm system power failure security system power failure alarm 220v

 Most of the domestic rural and remote areas have electricity, it has become more and more frequent that copper core in power transformer stolen. 

Expensive copper core stolen, which often causes facilities  destroyed and large area power outages and other malignant accidents, and brings great

economic losses to the power sector and the vast majority of users, which also seriously affects the normal work and life of the enterprises, institutions

and people. Outdoor transformer copper core stolen frequently, has become a major problem in recent years, a plague to public security prevention

department, electric power industry and users, which has become a social problem to be solved. Our company develop GSM smart power transformer

burglar alarm system independently, solving above problem successfully,obtaining many patents, getting good review from society,accumulating valuable

experience for the long term of our company.

1.Three phase four line power off alarm

Theft usually cut wires to steal transformers, but when three phase cut or power off, monitoring host will immmediately detect and send wireless SMS message or voice message to receiving host,

receiving host will transmit alarm singal  to microcomputer, then microcomputer will alarm after analysing and judging the host and find fault line through alarm software.

2.Three infrared warning

This method mainly use dual infrared and microwave to detect ane early warn.when someone is trying to close to the transformer, infrared shooting will detect the intruder,

then alarm host trigger transformer burglar alarm siren to drive away intruders through high pitched voice.

3.SMS alarm

This method is to preset a center number and multi user numbers. When the transformer's security is threatened, the alarm will send message to mobile phones to alarm,

duty officers receive the report immediately sent police to check situation and  deal with relevant problems.

4.Network alarm

The computers of receiving alarm center auto receive alarm,  users can clearly see the status of transformers through electronic map.

5.Vibration and pedal alarm

When someone tries climbing the telegraph pole of transformers, after installing a pedal sensor, it will alarm when someone is climbing. When being beaten or moved,

it will alarm through viberation sensor.

Cases:

1. Many power transformers were stolen overnight in December ,2015 in Cangzhou Hebei Province, which caused economic loss of 200,000 RMB.

2. September 27, Mazhang District,inner copper wire stolen, worth 20,000 RMB transformer became scrap

3. Sep. 26 transformer was hollowed out in Taiyuan

Structure of power transformer burglar alarm:

transformer anti-theft alarm host, GSM receiving host, alarm center software(center software and electronic map) ,siren.

Optional accessories:

PIR sensor, vibration sensor, displacement sensor,solar panel and anchor ear.

                                       Alarm receiving center

The principle of power transformer burglar alarm

 Wireless monitoring alarm mainframe installed on telegraph pole or near transformer.Power line or transformer once stolen, three-phase disconnection or power outage, 

alarm host immediately detects and  send SMS and voice message to receiving host, and the host receives the alarm signal after the data is transmitted to the microcomputer,

microcomputer  analyze  the alarm host and  possible fault line, after the sound alarm, alarm  screen display time, date, alarm extension, transformer fault and fault lines.

The electronic map display the fault alarm and the actual location of transformer. The alarm data stored in the database for  inquiry. The leadership on duty immediately

deal with relevant problems after the alarm call and send the police to do scene inspection.

       Working principle topological graph

Functions and features of power transformer burglar alarm

1, SMS alarm function
GSM short message alarm, intuitive and reliable, transmission distance is not restricted.

2.Three phase four line detection function
Three phase four line detection  of the power network can accurately detect and report any abnormal situation.

3.Networking alarm function
A center number and five users alarm number, also can automatic alarm through the computer center alarm. The electronic map with powerful network alarm function.

4.Inspection function
With the boot report to send and remote inspection functions (test reports and timing to send test information), can check whether the alarm host is working normal.

5.Power outages continue working and solar energy management function

Built-in 12V standby rechargeable polymer battery, automatic charge and discharge control, power automatic switching, sustainable power supply for more than 15 days.

For some agricultural irrigation transformer can also use electricity from solar energy, in order to adapt to  special case of transformer burglar alarm can’t get electricity.

6.With switching value alarm function

With 40 anti false function infrared, 8 digital inputs, equipped with disconnection sensor, displacement sensor , vibration sensor and other sensors in case of power supply disrupted and moved. 1 way switch output, 1 controllable 12V output, alarm linkage with other devices.

7.On-site voice alarm and remote propaganda function
Power transformer anti-theft alarm is equipped with more than 110 dB siren, once the transformer is stolen,host will immediately honk siren as a warning to the criminals, and monitor spot through remote propaganda.

January 2016, our engineering staff braved  cold in Cangzhou( Hebei Electric Power) installed more than 500 sets power transformer burglar alarms.

Our products can still work in -30 degrees , no equipment failure.The leaders were satisfied and highly praised.

The following is the installation  on-site picture:

Following are the specific functions:

1.Can connect external industrial camera, this system with own SMS, MMS, Email functions

2.8 wired zones,open/closed alarm mode is optional by self-programming

3.Support ISO 6.0 & Andriod APP control function 

4.Fixed code: 40 wireless zones,315/433MHz(optional)

5.Digital inputs are adopted optical-coupled isolators, which can prevent external high voltage from destroying internal components.

6.Send SMS automatically to report the state of digital input when it returns normal status.

7.Wireless keyboard for setting phone No.

8.Arm/disarm remotely through GSM SMS.

9.Modify zone content (Chinese 70 words, English 140 letters )

10.Send SMS to 5 preset mobile phone numbers while alarming

11.Auto-dial 5 preset phone numbers while alarming and monitor the sound at site.

12.Record function: Maximum recording time:1 min

13.Voice function: support play the user record voice

14.With wired Mic interface and siren interface

15.Inquiry host’s status and alarm events through SMS

16.Inquiry zones’ name and arm/disarm status through SMS

17.Digital inputs are adopted cal-coupled isolators, which can prevent external high voltage from destroying internal.

18.GSM network wireless communication for alarm, no PSTN cable, not fear cable cut

19.Temper device: Arming while the control panel removing or shaking.

20.Connect with alarm center through GSM network 

21.With ROHS/CE/FCC certifications, conform to 3C safety standard and GB12663-2001 government standard

Main technical parameters

 1.GSM frequency band:850/900/1800/1900MHZ(quad band)

 2.Fixed code wireless signal frequency:315MHz/433MHz 

3.Wireless distance: 100-200m

 Response time≤8s(GSM network normal)

4. Fixed code zones:40

5.Working conditions:Operating temperature:-45~+60℃  

   Humidity ≤95% no condensation

6. Standby current :5mA

7. Alarm current: <500mA

8. Standby power consumption:< 0.3W 

9. Alarm consumption:< 1-2W 

10. Adapter voltage:AC100- 240V  50Hz/60Hz.

Output voltage: DC12V / 2A

Standby battery:DC7.4V/1200mA

Standby battery working hours≥48 hours

11. Size:260mm(Length)×180mm(Width)×120mm(High)

   Gross weight:3.5Kg     Net weight: 2.5Kg

Remote controller

Power supply:DC12V(Build-in 12V dry battery)

Quiescent current: 0

Emission current≤15mA

Transmitting frequency:315/433MHz±0.5MHz

Transmission distance: no obstacle distance: 80m

Working conditions:

Operating temperature:-10~+55℃   Humidity ≤90%

Application field:

Computer room and base station which are nobody on duty and need remote control.

Warm reminder:

BL3000 has 8 wired guarding zones. It has power off GSM message and calling function,arm mode function,

time arm and disarm function.You can add PIR sensor, vibration sensor, displacement sensor accoring to your needs.

 Packing : netural box packin g

 Shiping :DHL/EMS/FEDEX/UPS 

 Certificate 

1, OEM&ODM Service
A, customized the language is appreciate (such as Aussian,Germany,Portuguese,French ,etc)
B, customized logo on the alarm system ,also can print your logo on the packing box.

2, 12 months Warranty and high quality

All our alarmes with 12 months warranty, first 3 months replacement, long-life maintenance
each alarm undergo strict tested by QC before shipment

3, Professional service and Factory Price
100% original brand manufactory production, highest quality with the competive price.

4, Payment
T/T, Western union, or Paypal 

Welcome to visit our company,also OEM and ODM orders are welcomed.

We hope to cooperate with you sincerely ^^