Sanle calcium silicate board is a new type of green environmental protection board with excellent performance, such as fireproof, moisture proof,insect-resistant ant, easy working, thermal insulation,low deformation coefficient and durable. It is widely used for ceiling, partition wall, basal plate for EPS board and baseplate for decorative board in offices, hospitals, factory building, villas,theaters and various art buildings.
Specification: | ||
Thickness(mm) | Width(mm) | Length(mm) |
4-30 | 1220 | 2440 |
Dimensional deviation: | ||
Thickness | ≤8mm | ±0.3mm |
≥ 9mm | ±0.5mm | |
Width | ≤1220mm | ±3mm |
>1220mm | ±4mm | |
Length | ≤2400mm | ±4mm |
>2440mm | ±5mm | |
Physical properties: | ||
Density | 1.2-1.6g/cm3 | |
Thermal conductivity | ≤0.29 W/(m.k) | |
Water absorption | ≤40% | |
Water contain | ≤10% | |
Moisture movement | ≤0.25% | |
Bending strength | average | >12 Mpa |
strength ratio | >60% | |
Non-combustibility | class A |
1. The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.
2. The vertical keel should be aligned well according to the requirement (generally being 612 mm) with laterally supporting keel installed.
3. Cutting the board material to the dimensions needed (about 10mm lower than wall height)
4. Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally about 200~250mm with screws sinking 0.5mm under the board face.
5. The expansion seam of about 4mm between boards should be kept.
6. The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously to avoid generating inner stress to make board material bucking.
7. Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.
1.Carry out ceiling line-measuring to determine the ceiling’s fixed position, the boom’s central range is generally 1200.
2.Connect and fix the boom and main keel with hanging piece to make the main keel keep level position.
3.Vertically fix the sub-keel to the main keel with hanging piece; the sub-keel axis’central range is 612mm.
4.Install the laterally supporting keel properly, its central ranges is 1224mm.
5.Fix the board on sub-keels with tapping screws, and to well the seam-connecting treatment.
Sanle group production bases:
Guangdong province :
Foshan sanle building materials industry co.,ltd
Zhaoqing sanle integrated housing manufacturing co.,ltd
Hebei province :
Zhengding sanle building factory
Weixian kaifeng building materials technology co.,ltd
Yunnan province:
Yuxi yimen sanle technology panel manufacturing co.,ltd
Foshan Sanle Building Materials Industry Co., Ltd is a subsidiary of Sanle Building Materials Group, who is a professional manufacturer engaging in the research, development, production, sale and service of fiber cement board, calcium silicate board and decorative cement board. Our R&D team has more than 20 years of research and development experience. After years development, now we own 4 production bases in China, such as Foshan, Zhaoqing,Hebei and Kunming. Our group covers 220,000 sqm factory area , with 800 workers and more than 15% R & D personnels and annual output more than 15,000,000 m2 panels.
Foshan Sanle Building Materials Industry Co., Ltd was established in 2005, located in Foshan City. Our company has introduced advanced fiber cement production technology form Japan, Thailand and etc, owning 3 the most advanced automated hatschek production lines, with big production capacity. All of our products are approved by national standards. We offer one-stop service on all kinds of building materials, to save your time and your cost. By close relationship with our suppliers, we guaranteed the stability and reliability of our goods. We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent product and service! We sincerely welcome you to visit our company or contact us for cooperation!
1. Are you manufacturer or trade Company?
We are a factory founded in 1998 with trade team for international service.
We have 3 imported production lines, yearly capacity can be 30 million square meters.
2.Which port can you support?
Guangzhou Port or Shenzhen port or any other China port you need. If provided destination port, CFR and CIF can be quoted for your reference.
3. What's your Minimum order quantity(MOQ) of your product?
Answer: Most customers choose 1x20"GP as trial order. Small orders are also accepted
4. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union,
Payment terms are negotiable if large order.
5. What is your lead time for your goods?
Usually within 15 days if stock not available.
Welcome to visit our factory to view more details.