Thermal Camera With HDMI-compatible port AI Binocular Thermal Imaging System Thermal & Optical Bi-spectrum Network Camera

AI Binocular Thermal Imaging System Thermal & Optical  Bi-spectrum Network Camera HDMI-compatible

No contact     Fast response    Dual light source     High-precision temp measurement

Description

This Intelligent AI binocular thermal imaging system is composed of AI binocular temp detecting camera and AI thermal imaging screening system.

Integrated by thermal temp detecting sensor of high-accuracy, built-in intelligent face capture algorithm, and ISP image processing technology etc,

this device is with face detection, temp detection and face capture, etc powerful features.

With AI thermal imaging screening system, it can accurately detecting the body temp, capturing face pic

and records for those people appeared in front of this device.It can effectively help to monitor and detect the body temp of entry and exit people ,thus contributing to prevent epidemic situation. It can be widely used at all kinds of entrances and exits of school, buildings, stations, etc.

TG8256C (Black color)  All functions keep the same as TG8256B

1. (Video Preview Window) Real-time display for both optical and thermal imaging

 2.Two ways to access the camera on Computer

A: via PC Software Client

       User Name: admin  Password: 123456

B: via Internet Browser with IP address(eg:192.168.1.18) 

  User Name:admin  Password:admin

3.  Setting Mask detection ON or OFF ,And CORRECTION to make sure the normal body temp out is around 36.5℃

4  Face mask detection Ware Mask: Yes or No 

5.Working with Computer

6. Working with NVR (Ai DeepinMind NVR) up to 16 Cameras (By 4Units of 4Ch NVR)

7.Multi-Person Temperature Detecting Simultaneously up to 20

2. Device Installation

2.1 Installation Position

1.Camera being set in front of the aisle to capture the face;

2. Suggested installation height is about 2 meters, and camera overlook view angle 0~15°

3.For accurate detection of body temp,1 meters(Range 1m to 2.5m)distance are tested for the optimum capture distance.

2.2I nstallation Environment Standard

1.Illumination Requirements: No backlight, no obviously reflect light on face, uniform light and no shadow. In addition, to ensure the enough illumination of the scene when capturing the face, it is suggested to increase the lighting devices if the face in the display is not bright enough which may effect the face capture(General 250~800Lux).

2.Light and Wind Requirements: This Device is suggested to be installed indoor, ensuring there is no wind between device and people, no direct sunlight, so as to avoid the detected temp too low or too high caused by blowing ,cooling and direct sunlight.

Device Connection

Connect the device to the computer correctly through network cable; After the device powered on, open the search tool on the computer,s earch device IP address. User can also modify the IP address by search tool at the same time.

Notice: Default device IP address is 192.168.1.18.

3.2  AI Thermal Imaging Screening Sytem

After device powered on, user can use AI thermal imaging screening system software to connect device, preview, setting, alarm clean, snapshot pic preview, export records, etc operation.

3.2.1 Main Interface Introduction

[Video Preview Window]: After device connected, user can view double screen(optical and thermal imaging)for real-time preview as above pic shows;

[IP Input Box]: Input device’s IP address. The device default IP address is 192.168.1.18;

[Connect/Disconnect Device Button]: Click[Connect]to view the real-time display,facecapture pic and temp detecting.Click[Disconect] to close the preview;

[Capture Display Column]:List the current captured face pic and detecting temp.

[Snapshot Folder]: Click the snapshot folder to check saved captured face;

[Setting]: Click to modify the settings for face capture and temp detecting alarm;

[Clear Alarm]: After click,the alarm will be canceled;

[Detects]: Counting the total numbers of face capture and shows;

[Suspect]: Counting the total number of face capture for those abovethe high temp limit setting and shows;

[Export]: Export counting records and saved as excel file;

[Clean]: Clear the total records.

Snapshot Folder

To click the [Snapshot Folder],you can check all the capturedface pics.

Notice: The folder is named by the date.

 Setting

Click[Setting]button to enter into the interface to modify the setting;

[On/Off]: Turn On/Off to temp alarm function;

[High Limit℃]: Alarm When detecting temp higher than the high limit℃

[Duration(S)]: Temp alarm duration time, default is 10 seconds

[Confidence]: Reserved, the reliability of judging an image as a face

[Capture Interv(MS)]: The interval time of Same people repeat face capture

[Select Mode(0-1) : 0 indicates asile environemntk,1 indicates indoor environment

[Face Deduplication (0-1)]: Same people only capture once, no repeat snapshot

[Correction℃]: Under the severe environment ,it will increase the compensation temp to improve the accuracy of temp measurement, time-of-use compensation can be set.

Device Upgrade

Users can use browser or PC tool for upgrade;

Notice: Brower upgrade package suffix is .ifu. PC tool upgrade package suffix is .bin

4.1 Web Upgrade

Notice: Only IE browser,QQ browser,and 360 security browser isworkable; IE Edge browser,360 speed browser are not able to use.

Step 1: Open Browser,input device IP address,and input the user name” admin” and password” admin”.

 Step 2: Click “setting”-“Setting”-“Maintain” to enter into the uprade interface;

Step 3: Click” Browse” to choose “app.ifu” updgrade file;

Step 4: Click “Upload” button to start upgrading,after upgrade completed,the web page will auto-refresh.