1. ON/OFF button:The black button is a hidden button(the emergencybutton).Remarks: this button is located in the hole and is used to open the emergency function. (It is closed before leaving the factory. Please turn it on with a pin when you use it. If you forget to turn on the black button when you have installed the LED tube, the green "full "indicator light and the red "charge" indicator light will flash, then you need to press the black button again, in order to open the emergency function.)
2. Test button: If you have installed the led tube, you can press the red button to test whether the emergency function is good. When you press the red test button and hold on, the light will turn on. When you release it, the light will recover to normal condition. Please note:
Must turn on the black button(ON/OFF) before you use the red test button.
3. Full indicator: The green indicator light is on, it means the internal battery is fully charged. (When the city power is cut off and the emergency function is opened, all the signal indicators will turn off .)
4. Charge indicator: When the red signal indicator light is on, it means that the battery is being charged, and it will automatically turn off after being fully charged.
Welcome to TradeChina
The Newest Factory Price Led T8 Emergency Tube Light Hot Sale 85 277V T8 LED 18W 22W Battery Lamp Power Lighting
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meo Food Co., Ltd.
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
0-30%
Nearest Port
Penang, Valparaiso,Jetta
Accepted Delivery Terms
Employees
501-1000 people
Accepted Payment Currency
USD,EUR
Average Lead Time
5 Day(s)
Certifications
Product Specifications
--Product Description
Product Description
Specification
TP-T58SMD220E2-14W□ TP-T8SMD220E2-14W□ TP-T58SMD264E2-18W□ TP-T8SMD264E2-18W□ | ||||||||||
※：TP stands for "company code", T58/T8 stands for "lamp cap", SMD220/264 stands for "number of lamp beads", E2 stands for "second generation emergency lamp", 14W/18W stands for "power" | ||||||||||
Electrical Specifications | ||||||||||
Model | TP-T58SMD220 E2-14W | TP-T58SMD220 E2-14W | TP-T58SMD264 E2-18W | TP-T58SMD264 E2-18W | ||||||
Electrical parameters | Input voltage | 100～277VAC | ||||||||
Alternating current | 0.2A /100VAC 0.05A/277VAC | 0.2A / 100VAC 0.06A / 277VAC | 0.24A /100VAC 0.1A / 277VAC | 0.24A / 100VAC 0.1A / 277VAC | ||||||
Working frequency | 50/60Hz | |||||||||
Peak power (state of charge) | 19W± 5% | 19W± 5% | 23W± 5% | 23W± 5% | ||||||
rated power | 14W ± 5% | 14W ± 5% | 18W ± 5% | 18W ± 5% | ||||||
Emergency power | 5~11W optional | 5~11W optional | 5~15W optional | 5~15W optional | ||||||
Power factor | PF>0.9@100VAC ; 0.84@277VAC | |||||||||
Charging time | ≥24 hours | |||||||||
Emergency duration | 2~6 hours (Refer to the timetable for optional) | |||||||||
Battery Type | LiCoMnNiO2 Ternary lithium battery 4* 2.2AH～2.6Ah,3.7V | |||||||||
Light parameter | Number of light sources | 220pcs | 220pcs | 264pcs | 264pcs | |||||
Luminous flux (at fullbrightness) | ＞1680LM± 5% | ＞1680LM± 5% | ＞2160LM± 5% | ＞2160LM± 5% | ||||||
Color temperature | 3000K/4000K/5000K/6000K± 5%（optional） | |||||||||
Color Rendering Index | Ra>80 | |||||||||
Led Luminous Efficiency | ＞120LM/W (Fully charged state) | |||||||||
Beam angle | 120° | |||||||||
Working Life-span | ＞30000 H | |||||||||
Structure | Material | Aluminum+PC | ||||||||
Color lampshade | Milky white / transparent | |||||||||
Size | W28.5*H32.5* L1163mm | W28.5*H32.5* L1212mm | W28.5*H32.5* L1163mm | W28.5*H32.5* L1212mm | ||||||
Lamp holder type | G5 | G13 | G5 | G13 | ||||||
Temperature | Temperature-18℃~+43℃ humidity 10~85%RH No condensation | |||||||||
EMC and safety regulations | Safety regulations | PART 15B, BS EN 60598-1:2015+A1:2018 BS EN 60598-2-22:2014BS EN 61347-2-7 IEC/TR62778:2014BS EN 62493:2015 EN IEC 55015 EN61547EN IEC61000-3-2 EN 61000-3-3+A1,EN 62321 Certified | ||||||||
Stress resistant | 2KV | |||||||||
Packaging | Inside the box | Pearl cotton | ||||||||
Carton size | W230 * H215* L1335mm | |||||||||
Case pack | 30Pcs/CTN | |||||||||
Carton’s Weight | ≈24kg | |||||||||
Remark | ※：IES file available | |||||||||
Product Feature:
l Wide AC input voltage （100-277VAC）
l imported LED chips, high luminous efficiency,power and energy more saver
l A grade ternary lithium battery, 4*2.2Ah～2.6Ah, 3.7V
Ultra-long emergency time limit, minimum level ≥ 2 hours
l Built-in certified emergency power, lifespan, high safety performance
l With emergency test button/indicator/battery power switch, appearance coordination,beautiful and textured
l 6063 aluminum with high thermal conductivity,high temperature resistant PC
l Suitable for warehouses, offices, shopping malls and other places
l Comply with CE and RoHS standards
l 3-year warranty
l imported LED chips, high luminous efficiency,power and energy more saver
l A grade ternary lithium battery, 4*2.2Ah～2.6Ah, 3.7V
Ultra-long emergency time limit, minimum level ≥ 2 hours
l Built-in certified emergency power, lifespan, high safety performance
l With emergency test button/indicator/battery power switch, appearance coordination,beautiful and textured
l 6063 aluminum with high thermal conductivity,high temperature resistant PC
l Suitable for warehouses, offices, shopping malls and other places
l Comply with CE and RoHS standards
l 3-year warranty
Emergency discharge time table
Model | Time Battery | 2h | 2.5h | 3h | 3.5h | 4h | 6h | |||||||||
TP-T58SMD220E2-14W TP-T8SMD220E2-14W | 4*2.2A， 3.7V | emergency fully bright 12W | emergency 10W | emergency 5W | ||||||||||||
4*2.6Ah， 3.7V | emergency fully bright 12W | emergency 8W | ||||||||||||||
TP-T58SMD264E2-18W TP-T8SMD264E2-18W | 4*2.2Ah， 3.7V | emergency 10W | emergency 5W | |||||||||||||
4*2.6Ah， 3.7V | emergency fully bright 15W | Emergency 10W | Emergency 8W | |||||||||||||
Remarks: The emergency duration is related to the emergency power/battery capacity, please choose the appropriate specifications according to the list | ||||||||||||||||
Control panel function description
Tips
1. When the LED tube is installed for the first time,please turn it on with a pin to open the black hidden button when you use it. When you hear the press sound, it means that the button is opened, the emergency function is also opened.
2. When the LED tube is under power,press and hold the red test button (Test), the red and green indicator lights will automatically turn off, the LED tube will light up. It means that it has entered the emergency function condition. This button is used to test whether the emergency function is normal working.
3. When the red(full) and green(charge) flash at the same time, it means that the ON/OFF button isn't turned on or another fault alarm occurs. Please press the button (NO/OFF) again; if the alarm can't be eliminated please stop using it immediately and let a professional replace or repair it!
1. When the LED tube is installed for the first time,please turn it on with a pin to open the black hidden button when you use it. When you hear the press sound, it means that the button is opened, the emergency function is also opened.
2. When the LED tube is under power,press and hold the red test button (Test), the red and green indicator lights will automatically turn off, the LED tube will light up. It means that it has entered the emergency function condition. This button is used to test whether the emergency function is normal working.
3. When the red(full) and green(charge) flash at the same time, it means that the ON/OFF button isn't turned on or another fault alarm occurs. Please press the button (NO/OFF) again; if the alarm can't be eliminated please stop using it immediately and let a professional replace or repair it!
Installation
² Ensure that the input voltage and frequency are within the specified range before installation.
² Please turn off the power before Installation.
² Make sure that the "hidden battery switch button" is in the pressed state during installation
² LED T8 fluorescent lamp tube does not need starter and ballast. Please make sure the above parts are disconnected or removed directly.
² The lamp connection and installation wiring diagram is divided into TYPE-B and TYPE-C,as shown below
² Turn on power to test after installation.
² Please turn off the power before Installation.
² Make sure that the "hidden battery switch button" is in the pressed state during installation
² LED T8 fluorescent lamp tube does not need starter and ballast. Please make sure the above parts are disconnected or removed directly.
² The lamp connection and installation wiring diagram is divided into TYPE-B and TYPE-C,as shown below
² Turn on power to test after installation.
Install the wiring diagram
Figure 1. Wiring diagramwithout a fire line :.
Figure 2. Wiring diagramwith a fire line
Precautions
² The installation wall must be firm and reliable.
² The installation accessories need to be installed firmly.
² After the installation and wiring of the light is completed, the power is tested again to guard against electric shock.
² Please do not open the light and change the electrical structure to prevent damage to the light. The damage caused is not covered by the warranty.
² The installation accessories need to be installed firmly.
² After the installation and wiring of the light is completed, the power is tested again to guard against electric shock.
² Please do not open the light and change the electrical structure to prevent damage to the light. The damage caused is not covered by the warranty.
The lamp can not be illuminated normally or emergency function troubleshooting
² After the light is not on, please check if the wiring is connected after power off.
² Check whether the black hidden switch is pressed.
² If the wiring is normal, no appearance damage, please contact the dealer or service center immediately.
² Check whether the black hidden switch is pressed.
² If the wiring is normal, no appearance damage, please contact the dealer or service center immediately.
After-sales service and repair
² In any case, if there is a problem, please contact your dealer or service center immediately.
² This product is repaired free of charge during the warranty period, and the appropriate material fee will be charged after the expiration of the warranty period.
² The company provides a hotline to answer various questions from users. Please call at 0755-28151799or email to info@toplightled.com
² This product is repaired free of charge during the warranty period, and the appropriate material fee will be charged after the expiration of the warranty period.
² The company provides a hotline to answer various questions from users. Please call at 0755-28151799or email to info@toplightled.com
Packing & Delivery
Product Packaging
Outer carton size：L1335*W230*H215mm
White pearl cotton + kraft carton package, 30cs/carton，≈24Kg
Company Profile
Shenzhen Toplight Lighting Technology Co., Ltd. is a professional manufacturer of LED lighting.
1) Specializes in LED tube light, LED panel light, LED plug light, LED high bay light, LED ceiling lights, T5/T8/T10/2G11/Circular/Double Shine T10/Unity tube series tubes, etc.
2) LED light factory, We focus on doing foreign trade business and also provide service for domestic trade companies. Our goal is to satisfy our customers' needs. We have the ability and confidence to meet customers' different demands for we have a complete system from design, development, production, process and package to after-sales service. Now we develop healthily and stably.
3) Our company complies with ISO9001:2008 standard and passed through the verification of GMC and Alibaba. Many kinds of products have got appearance and utility patents (No.ZL201130166046.8 and No.201120198027.8).
4) Our products have passed UL, CE, FCC, PSE and RoHS certifications. Thus, our products are favored by domestic and overseas customers. The development of our company is directly related to staff members' ideas and actions. Our ideal is to gather talented person and make their dreams come true. We put the emphasis on making high quality products. Our staff members are working hard and enjoying their work. Therefore, our company will build our brand in the LED industry and sincerely serve the global customers. We believe our dream will come true only if we work together positively.
FAQ
1. who are we?
We are based in Guangdong, China, start from 2011,sell to North America(53.00%),Western Europe(15.00%),Mid East(5.00%),Eastern Asia(5.00%),Southeast Asia(5.00%),South Asia(3.00%),Eastern Europe(2.00%),Northern Europe(2.00%),Oceania(2.00%),Southern Europe(2.00%),Central America(2.00%),South America(2.00%),Africa(2.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
LED Tubes,LED Linear Lights,LED High Bay Light,LED Flood Light,LED Tri Proof Light
4. why should you buy from us not from other suppliers?
Our company is engaged in led light since 2007,we have ourself R&D department,accepted OEM,ODM.Our workers with very rich experience in production. 2.The products have UL CE RoHS FCC PSE certificate ,etc.
5. what services can we provide?
Accepted Delivery Terms: FOB,EXW；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Japanese
We are based in Guangdong, China, start from 2011,sell to North America(53.00%),Western Europe(15.00%),Mid East(5.00%),Eastern Asia(5.00%),Southeast Asia(5.00%),South Asia(3.00%),Eastern Europe(2.00%),Northern Europe(2.00%),Oceania(2.00%),Southern Europe(2.00%),Central America(2.00%),South America(2.00%),Africa(2.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
LED Tubes,LED Linear Lights,LED High Bay Light,LED Flood Light,LED Tri Proof Light
4. why should you buy from us not from other suppliers?
Our company is engaged in led light since 2007,we have ourself R&D department,accepted OEM,ODM.Our workers with very rich experience in production. 2.The products have UL CE RoHS FCC PSE certificate ,etc.
5. what services can we provide?
Accepted Delivery Terms: FOB,EXW；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Japanese
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier