The Magnet Produced By ABM Can Be Used For Bathroom Magnetic Hanger 30cm Magnetic Poster Hanger Frame Wooden Magnetic Poster Han
Pot Magnets (Magnetic Pots) or magnet hooks with high strong holding force,pulling force from 30lb to 1000lb, it can be customized.
- Pot Magnets (Magnetic Pots) or magnet hooks are best for small sized magnetic products with maximum pull strength (ideally when in direct contact with ferromagnetic e.g. mild steel surfaces). The actual pull force achieved is dependent on the surface that is being clamped onto (material type, thickness, flatness, friction levels, etc), its quality (e.g. rust free), its size (thickness plus total surface area), etc.There are many applications for Pot Magnets, mainly in applications where a strong clamping force is required. Applications include Point of Sale, window dressing, door / cupboard and gate clamps, false ceiling clamps, signs and banners, torque limited seals, jigs and fixtures, lighting holders, marketing and exhibition displays, retrieval magnets, industrial fixings, etc.
Product Name | Round Neodymium Pot Magnet with eyebolt pulling force from 30lb to 1000lb NdFeB Pot Magnets (Magnetic Pots) or magnet hook |
Product Materials | NdFeB Magnets + Steel plate or steel pot,steel cup + 304 stainless steel + plastic rubber + bolt |
Grade of Magnets | N35, N38, N40, N42, N45, N48,N50,N52, 45SH, 48SH |
Coating | Ni, Ni-Cu-Ni, Zn, epoxy coating |
Spec. of hub hole | M8, M10 thread, Eyebolt, Counterbore hole + bolt/Customized ,according to customer's requirement. |
Size of the products | Customized ,according to customer's requirement. |
Working Temp. | >=80℃ |
Magnetic direction | Magnets are sunken in to a steel plate. The north pole is on the center of the magnetic face and the south pole is on the outer edge around it. |
Vertical pull force | From 15kg to 500kg, 30LBS to 1000LBS |
Testing device and Testing method | Pull Tester for pull force testing. The value of the magnetic pull force has some thing to do with the thickness of the steel plate and pull speed. Our testing value is based on the thickness of the steel plate =10mm, and pull speed = 80mm/min.) so, different testing method will bring a different result. |
Application | Widely used in offices, schools, homes, warehouses, hardware store, tool shop, machining shop, maintenance shop ,gun mount, gun rack and restaurants.This item is widely use for magnet fishing! |
- Hot Pot Magnets (Magnetic Pots) or Magnet Hooks Supplying By ABM Magnetics
Our pot magnets and magnetic hooks are widely used in offices, schools, homes, warehouses and restaurants......etc.
-Eyebolt Hook Magnets,Pot Magnets (Magnetic Pots) or Magnet Hooks Holding Force Measurement
- On the 10mm steel plate, we measured the vertical pull of the magnet is 68LBS(31KG)
-The forces have been determined at room temperature on a plate in polished steel with a thickness of 10 mm (80mm/min). A maximum deviation of -10% compared to the specified value is possible in exceptional cases.
- The pulling force will maximize when pulling from vertical direction with magnets surface.
- The Pulling Force will be influenced by many factors: the material of the stuff, effective contact area, the smoothness of the surface, pull direction, temperatures, ect.
ABM Also Providing A lot Of Different Shape And Size NdFeB, SmCo Magnets.
- ABM Magnetics focusing on the NdFeB magnets design and manufacturing over 20 years.
- ABM can supply a variety of different size, shape and grade magnets to customer, such as magnet disc, magnet block, magnet ring, arc magnet, bread magnet, cup magnet, magnet ball, magnet bar, magnetic hook, pot magnet,cylindrical magnet.
- ABM's magnets are widely used in electric motors, couplings, high efficiency rotors, drive components, electron beam devices, generators, sensor system, magnetic hook, UAV, mobile ......and so on.
Exhibition Scene
- In the exposition scene, many customers are very interesting in our magnets, especially in our design and manufacturing capability.
- We received a lot of feedback after exhibition, many customer are very impressed with our magnet and, magnetic rotors, magnetic components, pot magnet, magnet hook, magnet gun mount, gun rack.
1. What is the sample policy?
2. What is the normal lead time?
For stock products, we will send goods to you within 1-2 days after receiving the payment.If we do not have them in stock, generally speaking, production time is 15-25 days.
3. What is MOQ?
4. How to control the production processs?
- Our PQC runing SPC, CPK, X-bar, ensure the dimension consistancy and process stability
5. Why Choose Us ( ISO9001,TS16949, RoHS Passed )
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier