Particle size: Not less than 90% of the material shall pass through 2.8 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

UREA (Granular)

NOTE: Only when specially requested (for machine application) as it is slightly more expensive than free flowing Urea

Moisture content by weight: maximum 1%

Total nitrogen content by weight (on dry basis): minimum 46%

Biuret content by weight: maximum1.5%

Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 2 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

AMMONIUM SULPHATE

Moisture content by weight: maximum 1%

Total nitrogen content by weight (on dry basis): minimum 20%

Free acidity (as H₂SO₄) by weight: maximum 0.025%

Sulphur (as S) by weight: minimum23%

Particle size: Not less than 90% of the material shall pass through 2.8 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

CALCIUM AMMONIUM NITRATE (CAN)

Moisture content by weight: maximum 1%

Total nitrogen content by weight (on dry basis): 26%

Ammoniacal nitrogen by weight: 50% of total nitrogen

Nitrate nitrogen by weight: 50% of total nitrogen

Calcium and/or magnesium carbonate by weight: minimum 18%

Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

SINGLE SUPERPHOSPHATE (SSP) (Powdered)

Moisture content by weight: maximum 12%

Free phosphoric acid (as P₂O₅) by weight: maximum 4%

Water soluble phosphate (as P₂O₅) by weight: minimum 15.8%

Sulphur (as S) by weight: minimum 11%

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

SINGLE SUPERPHOSPHATE (SSP) (Granular)

NOTE: Price may be slightly higher than powdered material. Quotations may be asked for both types and decision to be taken based on availability and price.

Moisture content by weight: maximum 5%

Free phosphoric acid (as P₂O₅) by weight: maximum 4%

Water soluble phosphate (as P₂O₅) by weight: minimum 15.8%

Sulphur (as S) by weight: minimum11%

Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and shall be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

TRIPLE SUPERPHOSPHATE (TSP)

Moisture content by weight: maximum 5%

Free phosphoric acid (as P₂O₅) by weight: maximum 3%

Total phosphates (as P₂O₅) by weight: minimum 46%

Water soluble phosphate (as P₂O₅) by weight: minimum 42.5%

Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and shall be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

POTASSIUM CHLORIDE/MURIATE OF POTASH (MOP) (Crystalline powder)

Moisture content by weight: maximum 0.5%

Water soluble potash content (as K₂O) by weight: minimum 60%

Sodium (as NaCl) by weight: maximum 3.5%

Particle size: Not less than 65 % of the material shall pass through 1.7 mm IS sieve and be retained on 0.25 mm IS sieve

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

POTASSIUM CHLORIDE/MURIATE OF POTASH (MOP) (Granular)

NOTE: Price may be slightly higher than crystalline powder material. Quotations may be asked for both types and decision to be taken based on availability and price.

Moisture content by weight: maximum 0.5%

Water soluble potash content (as K₂O) by weight: minimum 60%

Sodium (as NaCl) by weight: maximum 3.5%

Magnesium (as MgC_l2) by weight: maximum 1%

Particle size: Not less than 90% of the material shall pass through 3.35 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% should be below 1 mm size.

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

POTASSIUM SULPHATE/SULPHATE OF POTASH (SOP)

Moisture content by weight: maximum 1.5%

Potash content (as K₂O) by weight: minimum 50%

Total chlorides (as Cl) by weight: maximum 2.5%

Sodium (as NaCl) by weight: maximum 2%

Sulphur (as S) by weight: minimum17.5%

Particle size: Not less than 65 % of the material shall pass through 1.7 mm IS sieve and be retained on 0.25 mm IS sieve

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

DIAMMONIUM PHOSPHATE (DAP)

Moisture content by weight: maximum 1.5%

Total nitrogen content by weight (on dry basis): minimum 18%

Neutral ammonium citrate soluble phosphate (as P₂O₅) content by weight: minimum 46%

Water soluble phosphate (as P₂O₅) content by weight: minimum 41%

Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm size

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cos.

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

NPK COMPLEX 15-15-15

Moisture content by weight: maximum 1.5%

Total nitrogen content by weight (on dry basis): minimum 15%

Neutral ammonium citrate soluble phosphate (as P₂O₅) content by weight: minimum 15%

Water soluble phosphate (as P₂O₅) content by weight: minimum 12%

Water soluble potash (as K₂O) content by weight: minimum 15%

Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm size

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

NPK COMPLEX 17-17-17

Moisture content by weight: maximum 1.5%

Total nitrogen content by weight (on dry basis): minimum 17%

Neutral ammonium citrate soluble phosphate (as P₂O₅) content by weight: minimum 17%

Water soluble phosphate (as P₂O₅) content by weight: minimum 13.6%

Water soluble potash (as K₂O) content by weight: minimum 17%

Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm size

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

NPK COMPLEX 19-19-19

NOTE: All other NPK complex grades will follow the same rule, particularly water soluble phosphate content should be 85% (minimum) of the neutral ammonium citrate soluble phosphate content

Moisture content by weight: maximum 1.5%

Total nitrogen content by weight (on dry basis): minimum19%

Neutral ammonium citrate soluble phosphate (as P₂O₅) content by weight: minimum 19%

Water soluble phosphate (as P₂O₅) content by weight: minimum 15.2%

Water soluble potash (as K₂O) content by weight: minimum 19%

Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm size

Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost

Each bag to guarantee minimum product weight (net) as specified on the bag

Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination

2. Micronutrient Fertilizers

ZINC SULPHATE

Zinc (as Zn) content by weight: minimum21%

Sulphur (as S) content by weight: minimum10%

Lead (as Pb) content by weight: maximum003%

Copper (as Cu) content by weight: maximum1%

Magnesium (as Mg) content by weight: maximum5%

Cadmium (as Cd) content by weight: maximum 0.0025%

Arsenic (as As) content by weight: maximum 0.01%

Matter insoluble in water by weight: maximum 1%

pH: not less than 4

Form: free flowing powder

CHELATED Zn, AS Zn-EDTA

Zinc content (expressed as Zn) by weight in the form of Zn-EDTA complex: minimum12%

Lead (as Pb) content by weight: maximum 0.003%

H: 6.0 – 6.5

Form: free flowing crystalline/powder

MANGANASE SULPHATE

Manganese (as Mn) content by weight: minimum 30.5%

Sulphur (as S) content by weight: minimum 17%

Lead (as Pb) content by weight: maximum 0.003%

Copper (as Cu) content by weight: maximum 0.1%

Magnesium (as Mg) content by weight: maximum 2%

Matter insoluble in water by weight: maximum 1%·

pH: not less than 3.75

Form: free flowing powder

BORAX (SODIUM TETRABORATE)

Boron (as B) content by weight: minimum10.5%

Lead (as Pb) content by weight: maximum0.003%

Matter insoluble in water by weight: maximum 1%

pH: 9.0-9.5Form: free flowing powder

COPPER SULPHATE

Copper (as Cu) content by weight: minimum 24%

Sulphur (as S) content by weight: minimum 12%

Soluble iron and aluminium compounds (expressed as Fe) content by weight: maximum 0.5%

Lead (as Pb) content by weight: maximum 0.003%

Matter insoluble in water by weight: maximum 1%

pH: not less than 3

Form: free flowing powder/granular

FERROUS SULPHATE

Ferrous iron (as Fe) content by weight: minimum 19%

Sulphur (as S) content by weight: minimum 10.5%

Free acid (as H₂SO₄) content by weight: maximum 1%

Ferric iron (as Fe) content by weight: maximum 0.5%

Lead (as Pb) content by weight: maximum 0.003%

Matter insoluble in water by weight: maximum 1%

PH: not less than 3.5

Form: free flowing powder

CHELATED IRON, AS Fe-EDTA

Iron content (expressed as Fe) by weight in the form of Fe-EDTA complex: minimum 12%

Lead (as Pb) content by weight: maximum 0.003%

pH: 5.5 – 6.5

Form: free flowing crystalline/powder

AMMONIUM MOLYBDATE

Molybdenum (as Mo) content by weight: minimum 52%

Lead (as Pb) content by weight: maximum 0.003%

Matter insoluble in water by weight: maximum 1%

pH: 5.0-5.5

Form: free flowing crystalline/powder

3. Rock Phosphate (RP)/Phosphate Rock (PR), for Direct Application

Total phosphates (as P₂O₅) content by weight: between 15-35% depending on source

Cadmium (as Cd) content by weight: maximum27 mg/kg of RP

Particle size: Not less than 90% of the material shall pass through 0.15 mm IS sieve and the balance shall pass through 0.25 mm IS sieve

4. Organic Manures

Quality of organic manures vary widely, depending on the materials used. However, basic criteria to consider suitability of the material as a nutrient source are:

Organic matter content by weight: minimum 30%

Organic carbon content by weight: minimum12%

Total nutrients (N+ P₂O₅+ K₂O) content by weight: minimum 5%

Subject to doubt and availability of analytical facilities, contents of following heavy metals should be checked:

Arsenic (As) content by weight: maximum 10 mg/kg

Cadmium (Cd) content by weight: maximum5 mg/kg

Cromium (Cr) content by weight: maximum50 mg/kg

Copper (Cu) content by weight: maximum300 mg/kg

Lead (Pb) content by weight: maximum100 mg/kg

Urea (46%N) (While free flowing)

i)	Moisture percent by weight, maximum	1.0
ii)	Total Nitrogen, percent by weight (on dry basis) minimum	46.0
iii)	Biuret, percent by weight, maximum	1.5
iv)	Particle size- Not less than 90 per cent of the material shall pass through 2.8 mm IS sieve and not less than 80 per cent by weight shall be retained on 1mm IS sieve

3. Urea (Coated) 45%N) (While free flowing)

i)	Moisture percent by weight, maximum	0.5
ii)	Total Nitrogen, percent by weight, content with coating, minimum	45.0
iii)	Biuret, percent by weight, maximum	1.5
iv)	Particle size- Not less than 90 per cent of the material shall pass through 2.8 mm IS sieve and not less than 80 per cent by weight shall be retained on 1mm IS sieve

No desirable products?

Sourcing assistant>

How to start your business

Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier

Send Enquiry

To: Lily Liu

Meorient Import & Export Co.LTD

Enquire