Port | Qty | Features |
DI (digital input) | 4 | ● Accept dry contact |
DO (digital output) | 2 | ● Relay output (NO, Contact load : 2A / 125VAC,220VDC) ● Remote or local event activate DO on/off/pulse ● Remember status when power lost |
AI (analog input) | 8 | ● Accept 4-20mA (option: 0-5V), Sampling frequency: 33Hz, 16-bit precision) ● Convert signal to actual measure value,support adjustment ● Configurable parameters for signal acquisition, alarm, data communication ● Detect connect or disconnect to alarm |
RS485 | 1 | ● Support Modbus RTU protocol ● Can work as a modbus master to read/write 64 data from slaves ● Can work as a modbus slave to be read/write by master ● Support isolation,15KV ESD protect |
RS232 | 1 | ● Configuration port |
Ethernet | 1 | ● Support ARP, DHCP, TCP, UDP protocol ● Can be configured as serial port server, TCP client, Modbus TCP server |
Wireless network communication | ||||||||
● Option network: GPRS, 3G, 4G ● TCP/IP connect at most 4 servers(support Static IP address or domain) ● Events(e.g. alarm, timer) trigger upload data ● Communication protocol: Modbus TCP,http post, Cwt_IO(two-way communication ● Support two-way data transparent transmission with RS485 or RS232 |
SMS Communication(only available for cellular version) | ||||||||
● Preset 10 phone numbers (support distribute authority to receive sms) ● Sms alarm when any IO channel triggered or out of preset normal range ● Editable alarm and recover sms with time stamp ● Query any IO channel’s status or value via sms command ● Control output via sms command ● Sms report any IO channel’s status or value on schedule ● Remote setting via sms commands ● Can query SIM card balance, sms forward ● Support power lost sms alarm and recover sms(works with inside battery) |
Ethernet communication | ||||||||
● Can be configured as TCP client to connect servers, support protocol: Modbus TCP,http post, Cwt_IO(two-way communication) ● Can be configured as Modbus TCP Server(Modbus slave), can be read or write by Modbus master(e.g. SCADA, PLC, HMI) ● Can be configured as serial port server, support two-way data transparent transmission with RS485 or RS232 ● Inside HTTP server |
RS485 Modbus communication | ||||||||
● Support Modbus RTU protocol ● Can work as a modbus master to read/write 64 data from slaves (like meter, PLC, transducer etc.) ● Can work as a modbus slave to be read/write by master (HMI, SCADA etc.) ● Support Modbus RTU to TCP convert over Ethernet or GPRS/3G |