Product Number | AS3HO25 / AS3HO40 / AS3HT25 / AS3HT240 |
Product Name | RTV 3 HTV Liquid Silicone Rubber Material |
Color | Translucent - Transparent |
Shore A | 25°± 2 - 40°± 2 |
Viscosity | 20000 - 60000 cps |
Room temperature liquid silicon rubber for molds is a kind of two parts silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1. It can be cures at room temperature as well as under heat. It's a kind of food grade silicone rubber mainly used for mold making.
Operation Instructions
1: Prepare the desired molds
Prepare a desired mold and clean it before operation.
Notes: Make sure the desired molds and operation tools were cleaned up to avoid uncured problem.
( Suggest to use stainless steel, wooden or plastic material mixer. )
2: Take amount Part A :100 g / Part B :100 g ( or Part A : 100 g and Part B :10 g ) and mix evenly.
Notes:
* Weigh the two part exactly by electronic weight. If any part not in exactly weight, it may cause changing of hardness, or even cause uncured problem.
* Mix part A and part B evenly.
3: Vacuum the mixed material
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
4: Pouring casting
Notes:
* For simple mold, just to pour the vacuumed material into mold, cured will be 8-12 hours.
* For fine designed mold, to brush the liquid silicone on mold surface then pour the silicone into mold. This will make the casing properly.
Normally, different size of silicone mold should be select according to different product's features.
For example :
* For skin like / Human body / Sex Doll :
Recommend our AS3NO05 / AS3NT05.
* For products size ( within 20 cm ) :
With fine designs, soft silicone is suitable, suggest 10-20 shore A.
* For products size ( 20cm-80cm ) :
With fine designs, suggest 20-25 shore A.
With simple designs, suggest 25-30 shore A.
* For products size ( 80cm-150cm ) :
With fine designs, suggest 25 shore A.
With simple designs, suggest 30-35 shore A.
* For products size ( more than 150cm ) :
With fine designs, suggest 25-28 shore A.
With simple designs, suggest 35-40 shore A.
Production as per customer request. Can be adjusted according to customer requirements.
Free sample upon request.
Our Storage
Packing Details : Packing, 25 kg & 200 kg packing load.
Delivery Details : 7-14 days after order confirmed.
Packing way according to customer suitable way, welcome for more discussion.
This is two component liquid silicone rubber for medical product, such as negative pressure ball, catheter connector and all kinds of medical tube and other products.
Liquid silicone is generally used in baby products and kitchen supplies as well as medical supplies. It is in direct contact with food and human body.
The safety of liquid silicone rubber is a food material with high transparency and high safety. It is not added with auxiliary materials such as vulcanizing agent during molding, and is sealed and molded.
* Anti Slip
* Skin Like
* Food Grade
* Easy to Deforming
* Low Shrinkage
* Good Tensile
* Good Tear Strength
* Translucent / Transparent
1. Skin safe & medical grade
2. Very soft
3. Dry and smooth surface
4. Real like
5.Odorless
6. Long casting
7. Easy processing - mixing ratio 1 : 1 or 10 : 1
8. High tear and tensile strength
9. Adjustable working time and curing time
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay for the freight.
A: Payment : T/T in advance.
If you have any more question, please feel free to contact us as below.
A: Yes, we support small order quantity.