PVC film, PVC decorative sheet,TPU film, TPU hot melt adhesive film factory.
Thickness | 0.05-1mm | Material | TPU | ||
Width | 15mm~1500mm | Certificate | SGS,BV,FDA,BACL,CTI | ||
Length | customize | Cold-resistant | -30°C | ||
Color | Symphony | Anti-UV | Grade 3.5-4 | ||
Hardness | 68A~98A | Elongation | 300%-600% | ||
Appearance | Embossing | Melt point | 120~180℃ | ||
Gravity | 1.12-1.25g/cm3 | Break Tensile Strength | 30Mpa-60Mpa | ||
Advantage | Eco-friendly,Washable&Durable,Good strench,Good adhesive streng,High wearing and bending resistance, good elasticity, excellent waterproof and breathable, temperature resistance, Yellowing resistance, UV resistance is above 4 degrees | ||||
Application | drink water bag, water walking balls, football, volleyball, ladies shoes, sports shoes, handbag, tag, belt, umbrella,toys and other inflatable products. Air Bladder&Kitesurfing Bladder etc. Outdoor product:Water Bladder, Fabric laminating, Waterproof product, Rainwear, Apron etc Football&Soccer leather, Garment, Suitcase,Medical product, Breathable product |
Property | Polyester-based TPU | Polyether-based TPU |
Abrasion resistance | A | C |
Mechanical properties | A | B |
Low temperature flexibility | C | A |
Heat aging | B | D |
Hydrolysis resistance | F | A |
Chemical resistance | A | D |
Microbial resistance | F | B |
Adhesion strength | B | D |
Injectability | A | C |
Difference between polyester-based and polyether-based TPU (A = excellent; B = good; C = acceptable; D = poor; F = very poor) | ||||
Property | Polyester-based TPU | Polyether-based TPU | ||
Abrasion resistance | A | C | ||
Mechanical properties | A | B | ||
Low temperature flexibility | C | A | ||
Heat aging | B | D | ||
Hydrolysis resistance | F | A | ||
Chemical resistance | A | D | ||
Microbial resistance | F | B | ||
Adhesion strength | B | D | ||
Injectability | A | C |