The TPT1600 test bench is designed to test the pressure of cylinder head and cylinder block coolant circuits.
Features:
* Easy and efficient pressure test of cylinder head and cylinder block coolant circuits.
* Quick and easy clamping system allowing tests at a pressure of the 4 to 5 bar.
* 360° electric powered roll-over fixture. 360°
* Hydraulic cradle lift for easy positioning of heavy cylinder heads.
* Stainless steel tank with heat barrier.
* Heating elements: two changeover 4500 Watts elements.
* Water level control. Low voltage:24 V operating control.
* Electronic adjustable thermostat.
* Heating programmer daily or weekly.
Part Characteristics | TPT1600 | TPT1600L |
Maximum length (mm/inch) | 1250 mm / 49” | 1350 mm / 53.15” |
Maximum width (mm/inch) | 400 mm / 15.74” | 400 mm / 15.74” |
Maximum height (mm/inch) | 300 mm / 11.81’’ | 300 mm / 11.81’’ |
Capacity of stainless steel tank | 500liters / 132 USngal | 500liters / 132 USngal |
Heating elements (kw) | 2x4.5 | 2x4.5 |
Hydraulic hoist (kw) | 0.55 | 0.55 |
Gear-motor (kw) | 0.25 | 0.25 |
Rotational speed (tr/min) | 4RPM | 4RPM |
Up and down travel time (mm/inch in 10sec) | 500mm/19.69” | 500mm/19.69” |
Thermostat ( °C ) | 0-70 | 0-70 |
Power supply | 400 V 3 PH + Ground (no neutral) | 400 V 3 PH + Ground (no neutral) |
Net weight approx (kg/lbs) | 550/700 | 600/750 |
Length(mm/inch) | 2000 mm / 78.75” | 2000 mm / 78.75” |
Width (mm/inch) | 1050 mm / 41.34” | 1050 mm / 41.34” |
Height (mm/inch) | 1700 mm / 67” | 1700 mm / 67” |
Standard Accessories
NO | Item | Unit | Qty | Remark |
1 | Round washer(φ60) | PC | 16 |
|
2 | Open Gasket(φ60) | PC | 16 |
|
3 | T nut(M16) | PC | 16 |
|
4 | Screw rod(M16) | PC | 16 |
|
5 | Pressing plate | PC | 4 |
|
(Standard Acc’s) | ||||
6 | Parallel supporting plate | PC | 2 |
|
(Standard Acc’s) | ||||
7 | Rubber seal ringφ30 δ=3 | PC | 20 |
|
8 | Rubber seal ringφ40 δ=3 | PC | 15 |
|
9 | Rubber seal ringφ60 δ=3 | PC | 10 |
|
10 | Rubber seal ring100×50 δ=3 | PC | 10 |
|
11 | Rubber seal ring80×40 δ=3 | PC | 10 |
|
12 | Rubber seal ring60×30 δ=3 | PC | 20 |
|
13 | Rubber plate 290×200 δ=3 | PC | 1 |
|
14 | Quick-change connector(M5) | PC | 3 |
|
15 | Manual HD1600 | block | 1 |
|