Features
1. Automates your hand tools
2. Eliminates operator hand fatigue-foot pedal controls the unit
3. Low cost alternative to hand crimping tools
4.10 time faster than manual crimping
5. Multi-function operations
6. Portable and lightweight
7. Small bench top footprint
(1) Place the crimping terminal in the corresponding crimping die sets.
(2) Place the stripped wires into the terminals, step down the foot air valve, and release the air valve after the
completion of the crimping.
(3) When replacing the crimping die sets, the air source shall be shut off to avoid the risk caused by the improper
operation. Remove the die sets and fasten the screws using screwdriver.
(4) Replace with the required crimping die sets, and then fasten the screws again.
Model | TM-P120 |
Crimping range | 0.5-16mm2 |
Air pressure range | 0.5-0.8MPa |
Output | 2.0T |
Weight | 6kg |
Dimensions | 275x 128 x 145 mm |