TIN Coating Apollo Circular Saw Blade For Metal Pipe Cutting
Saw blade including metal hot-cutting circular blade for tube cutting, metal cold-cutting circular blade for tube cutting , TCT circular blade for tube cutting , HSS segmental circular blade for tube cutting , and diamond circular saw blank, band saw blade ,slitting saw, slotting saw ,all available .
Different Model of HSS Circular saw blade is available .
HSS/ HSS-E DMo5 circular saw blade M2 M35 DIN 1.3343 DIN 1.3243
Dia*thickness | Hole:From 5mm-32mm-40mm-50mm etc | |
20x0.2-3 | 25x0.2-6 | 32x0.2-6 |
40x0.2-0.8 | 75x6.5-7 | 125x0.8-1.2 |
40x1-1.5 | 75x7.5-8.5 | 125x1.5 |
40x2 | 80x0.5-0.8 | 125x2 |
40x2.5-3 | 80x1-1.2 | 125x2.5-3 |
40x3.5-4 | 80x1.5 | 125x3.5-4 |
40x4.5-5 | 80x2 | 125x5 |
50x0.5-0.8 | 80x2.5-3 | 125x5.5-6 |
50x1-1.5 | 80x3.5-4 | 150x1-1.2 |
50x2 | 80x4.5-5 | 150x1.5 |
60x0.3-0.4 | 80x5.5-6 | 150x2 |
60x0.5-0.8 | 80x6.5-7 | 150x2.5-3 |
60x1-1.2 | 80x8 | 150x3.5-4 |
60x1.5 | 100x0.5-0.8 | 150x4.5-5 |
60x2 | 100x1-1.2 | 150x5.5-6 |
60x2.5-3 | 100x1.5 | 150x6.5-7 |
60x3.5-4 | 100x2 | 150x7.5-8.5 |
60x4.5-5 | 100x2.5-3 | 160x1-1.2 |
63x0.5-0.8 | 100x3.5-4 | 160x1.5 |
63x1-1.2 | 100x4.5-5 | 160x2 |
63x1.5 | 100x5.5-6 | 160x2.5-3 |
63x2 | 100x7 | 160x3.5-4 |
63x3 | 100x8 | 160x4.5-5 |
75x0.5 | 110x0.8-1.2 | 160x5.5-6 |
75x0.6-0.8 | 110x1.5 | 200x1.5 |
75x1-1.2 | 110x2 | 200x2 |
75x1.5 | 110x2.5-3 | 200x2.5-3 |
75x2 | 110x3.5-4 | 200x3.5-4 |
75x2.5-3 | 110x4.5-5 | 200x4.5-5 |
75x3.5-4 | 110x5.5-6 | 200x5.5-6 |
75x4.5-5 | 110x7 | 200x6.5-7 |
75x5.5-6 | 110x8 | 200x7.5-8.5 |
225x2 | 250*1.0-2.5 | 275x1.0-2.5 |
300x1.2-3.0 | 315x2.0-3.0 | 325x2.0-2.5 |
350x2.0-3.0 | 370x2.5 | 400x2.0-3.0 |
425x3.0 | 450x3.0 | 500x3.0-4.0 |
Diameter mm Bore
1.5" 40 5/8"to 2"
8" 200 5/8"to 2"
10" 250 5/8"to 2"
12" 300 5/8"to 2"
14" 350 5/8"to 2"
15" 400 5/8"to 2"
19" 500 5/8"to 2"
Teeth:
The different kinds of tooth forms are used according to different requirements of cutting.
How to choose the right tooth form?
1.Tooth form "A" and "AW"
For thin Metal Slitting blade for tube cuttings with a tooth pitch up to approx. 3.0mm Advisable for brass, tooth form "A" is
suitable for slotting materials. All teeth of tooth form "AW" are bevelled alternatively.
2.Tooth form "B" and "BW"
Suitable for cutting tubes and profiles made of steel or non-ferrous metals. Tooth form "B" is specialized for cutting very thin walled popes and profiles. All teeth of tooth form "BW" are bevelled alternatively.
3.Tooth form HZ
This tooth is also known as form "HZ". Teeth are ground according to the roughing and finishing tooth system. A tooth pair is consisting of one roughing tooth(1/3 cutting width) and one finishing tooth(2x1/3 cutting width). According to the triple chip geometry the roughing tooth is approx.0.2-0.3mm higher compared with the finishing tooth. Tooth form "HZ" is suitable for cutting solid materials.
4.Tooth Form BR
Tooth form BR is a parrot tooth with chip breaker.This tooth form is sutiable for cutting pipes under high performance conditions because the teeth are side cutting.
Finishing Color: