TI CC1352 2.4G Sub-1G wireless module SimpleLink ZigBee module with Power Amplifier TI CC1352P
TI CC1352 2.4G Sub-1G wireless module Simple Link Multi-protocol BLE5.1 module with Power Amplifier TI CC1352P
RF-TI1352P1 is an RF module based on TI SoC CC1352P with integrated power amplifier. It integrates a 48 MHz and a 32.768 kHz crystal, a 256 KB ROM, a 352 KB Flash, and the half-hole antenna pin to guarantee the external antenna connection. Its ARM® Cortex®-M4F core application processor optimized for long-range and low-power. It features small size, robust connection distance, and rigid reliability. The multi-band module supporting multiprotocol for both Sub-1 GHz and 2.4 GHz through a DMM driver for Thread, Zigbee®, Bluetooth®5.1 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY®, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz and 2.4 GHz). 1.27-mm pitch stamp stick package for easy assembling and cost-effective PCB design.
Parameters of RF-TI1352P1
|
Chipset |
CC1352P |
|
Supply Power Voltage |
1.8 V ~ 3.8 V, 3.3 V is recommended |
|
Frequency |
800 MHz ~ 928 MHz, 2402 MHz ~ 2480 MHz |
|
Maximum Transmit Power |
+20.0 dBm |
|
Receiving Sensitivity |
-121 dBm @ Sub GHz (Long-range Mode) -110 dBm @ Sub GHz (50 kbps) -105 dBm @ Bluetooth 5.0 (LE Coded PHY) |
|
GPIO |
23 |
|
Power Consumption |
RX current: 5.8 mA @3.6 V, 868 MHz 6.9 mA @3.0 V, 2.4 GHz TX current @ 20 dBm: 63.0 mA, 3.3 V, 915 MHz 85.0 mA, 3.0 V, 2.4 GHz MCU 48 MHz (CoreMark): 2.9 mA (60 μA/MHz Sensor Controller: 30.1 μA @ Low Power-Mode, 2 MHz, running infinite loop Sensor Controller: 808 μA @ Active-Mode, 24 MHz, running infinite loop Standby mode: 0.85 µA Sleep Mode: 150 nA |
|
Support Protocol |
Thread, ZigBee, BT 5.0 and TI 15.4-Stack (Sub 1GHz) |
|
Crystal |
48 MHz, 32.768 kHz |
|
Package |
SMT packaging |
|
Communication Interface |
UART, SPI, I2C, I2S, ADC |
|
Dimension |
25.0 mm × 16.4 mm |
|
Type of Antenna |
Half-hole interface |
|
Operating Temperature |
-40 ℃ ~ +85 ℃ |
|
Storage Temperature |
-40 ℃ ~ +125 ℃ |
 |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier