TDM410PL Product Description
The TDM410PL is a new generation Asterisk 4-line analog voice card that can be installed in a 2U or 4U chassis, provides the ability to connect analog phones to PSTN lines and supports a 4-channel FXO/FXS combination.
Under Asterisk environment, TDM410PL can bring high quality voice call quality and application of telephone system for communication system and support comprehensive protocol processing. It is installed on Linux-based operating system and completely open to developers. Developers can easily do secondary development on this platform to provide more characteristic value-added services.
Product features:
1. TDM410PL is an Asterisk 4-line analog voice card that supports four-channel FXO or FXS, and FXO and FXS can be matched at will. The red module is FXO and the green module is FXS.
2. TDM410PL is suitable for installation in 2U or 4U server chassis with PCI interface.
3. Universal: the configurable circuit interface meets the requirements of analog circuits in countries around the world.
4. The driver layer is fully compatible with Asterisk board card to enjoy the security and stability of open source code.
5. No need to install additional drivers to avoid potential risks. Asterisk fully comes with a DAHDI/Zaptel driver (wctdm24xxp driver, no patches required).
6. Support Linux, BSD operating systems, CentOS, openSUSE, Fedora, Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD.
7. Based on DMA data reading and writing technology, it supports fast data transmission and greatly reduces the CPU utilization rate of the computer.
8. Support the codec of A-Law,μ-Law,G.729,G.723,GSM,GSM,Speex,ADPCM formats.
9. Can support the Asterisk ®, Elastix ®, FreeSWITCH ™, PBX in a Flash, trixbox ®, Yate ™ and other IPPBX/IVR and other open source software application.
10. With the inherent IP architecture, VoIP communication equipment can be built without IP voice card, and cross-network communication services can be provided by IP network.
Technical parameters:
• Support 4 random combinations of FXO/FXS modules for a single card
• Support 4-way RJ11 interface
• Suitable for PC cases installed in 2U or 4U
• Compatible with 32-bit 33MHz PCI and PCI 2.3
• Automatic identification of bus voltage (5V or 3.3v)
• High stability firmware output/input
• Power consumption: lowest 2.77W, highest 11.6W
• Working environment temperature: 0 to 50 ℃
Storage temperature: - 40-125 ℃
• Card size: 165MM X 68MM X 20MM
• Package size: 230MMX150MMX40MM
• Packing weight: 0.2KG
The operating system
• Linux (all versions and distributions 1.0 or above)Minimum system hardware configuration
• CPU: 800-mhz Pentium III• memory: 128Mb
• Available PCI slots
Contact me :Stephen
mobile&Wechat&whatsapp :+8615889749239