Distence between centers | 1000mm | Range of inch threads | 4-56TPI(34kinds) | ||||||||
Swing over bed | 355mm | Range of metric threads | 0.4-7mm(26kinds) | ||||||||
Swing over carriage | 195mm | size of turning tool | 16*16mm | ||||||||
Swing over gap | 476mm | Top slide travel | 75mm | ||||||||
Width of body | 186mm | Cross slide travel | 170mm | ||||||||
Spindle bore | 38/52mm | Tail stock quill travel | 95mm | ||||||||
Taper of spindle bore | MT5/MT6 | Saddle travel | 1000mm | ||||||||
Range of spindle speeds | 70-2000rpm | Taper of tailstock quill | MT3 | ||||||||
Step of speeds | 8steps | DIA.of lead screw | Φ22mm | ||||||||
Range of longitudinal feeds | 0.052-1.392mm/r(0.002"-0.0548") | Pitch of lead screw | 3mm or 8TPI | ||||||||
Range of cross feeds | 0.14-0.38mm/r(0.00055"-0.015") | Motor | 1500W |