TAS5630 2.1 Digital amplifier 300W+150W+150W HIFI Subwoofer Audio power Amplifier Board module

TAS5630 2.1 Digital amplifier 300W+150W+150W HIFI Subwoofer Audio power Amplifier Board module

Product Description:

All parts of this product are original authentic, unadorned, pure quality; use of high- quality original parts, not only to ensure the safety and quality, long life, more importantly, to make the actual performance to achieve the design goals of a strong guarantee. The pursuit of first-rate quality is our consistent aim.

Product details:

The OPA1632 is a fully differential amplifier designed to drive high-performance audio analog-to-digital converters (ADCs). The highest audio quality, it provides very low noise and output drivers, this application was optimized for the OPA1632 Excellent gain bandwidth of 180MHz 50V/μs and very fast slew rate, resulting in very low distortion of 0.000222%. Very low input noise of 1.3nV/√Hz further ensures maximum signal-to-noise ratio and dynamic range. Full differential Structural flexibility allows for easy single- ended differential output conversion. Differential output reduces even harmonics and reduces common-mode noise.

The OPA1632 provides high performance ADCs with high-performance audio. PCM1804. The flexibility of this amplifier. TI's TAS5630 is a Class-D amplifier with 300W stereo (600W total power) analog input integrated with feedback, capable of delivering up to 300W stereo from a single-supply 50V to 4ohm speakers, with conventional Class AB amplifiers Performance (<0.03% THD) and Class D Amplifier Power Supply Efficiency.

Its SNR is greater than 100dB, PSRR is 80dB, and power stage efficiency is as high as 88%. Texas Instruments TI Industry Highest power class D amplifier -Using the original TAS5630, OPA1632DR, TL072

The main filter electrolytic capacitor uses nichicon brand, capacity 470UF/100V*4, to ensure a steady stream of powerful power support.

The resistor uses a five-ring metal resistor, and the main loop uses a five-ring metal film resistor with an accuracy of ±1% to ensure a good signal-to-noise ratio.

Use a fully shielded high-current inductor to ensure that the sound is crisp and powerful.

PCB adopts 1.6mm
thick double-sided plate, 2.0oz thick copper, and spray tin process to ensure good current performance. First-class PCB quality.

Basic parameters:

1. Working Method: Type D

2. Quiescent current: 65mA

3. Work efficiency: 88%

4. Output power: 300W+2*150W    4ohm 10% THD

5. Frequency response: 20Hz to 20KHz

6. Dynamic range: >100 dB

7. Signal to noise ratio: 100dB (A-Weighted)

8. Operating voltage: DC48V

9. PCB size: 150*95MM

10. Potentiometer function: from left to right

1. Subwoofer volume 2. Left and right channel treble 3. Left and right channel volume 4. Total volume

11. Potentiometer spacing:
22MM*22MM*30MM
Packaging Details
Package Weight: 0.5kg (1.10lb.)

Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)

                                   DC DC converter/relay module/amplifier/motor controller

Payment:we can accept paypal west union TT RMB payment

Shiping:we will send out package asap,it normal 3-7days,we can send by DHL Fedex UPS DPEX

              EMS....