professional refill holder suction tool clip for HP 21 22 6657 6658 8728 57 58 28 92 93 94 95 96 97 98 99 100 336 342 338 343 339 344 with accessories
**high quality ABS material
**small size
**simple operation with detailed manual instruction with pictures
size is 5.1*3.3*6cm
weight is 25.2g/piece
packing information | |||||
model | QTY in Inner box | QTY in master box (PCS/master box) |
G.W. (KG) |
N.W. (KG) |
CARTON SIZE (CM) |
T8 | 50pcs/inner box | 600pcs/12inner box | 19.2 | 18 | 46*41*42 |
T8 | 50pcs/inner box | 300pcs/6inner box | 9.5 | 9 | 37*34.5*27.5 |
Ink Volume Reference:
C9362: 5ml
C9361: 5ml
C8765: 11ml
C8766: 7ml
C8767: 21ml
C9363: 14ml
C9364: 11ml
C9369: 13ml
C9368: 15ml
Operation steps:
Get ready
Tear off the label on the ink cartridge to check the ink injection inlet. Please make sure the color of ink for each ink inlet.
Insert Inkjet Cartridge
Insert the nozzle part of the cartridge into the refill clip and push the top of the cartridge all the way in until you hear it “clicking” into place.
Refilling Ink
Insert the injection needle deep into the ink injection inlet of the specific color, with the needle directed towards the nozzle.
Pull up the injection needle about 5mm backward, and then slowly inject appropriate ink. Repeat injection for each color.
Warning: The ink volume specified above is for a completely empty cartridge.
Stabilize Internal Pressure
Connect the syringe to the rubber hole of the refill clip, and slowly suck out internal air until 0.5ml of ink is filled in the syringe.
Remove the cartridge from the refill clip and clean the excessive ink around the nozzle, dabbing the nozzle part on soft tissue.
Install the cartridge into the printer and run “head cleaning” process before use.