t300 Key Programmer English Spanish Optional T300 Auto Key Programmer V17.8 Car Key Maker T300 KEY Code Programmer

Notice
1. It can not do Ford, GM and Holden. please pay attention.
2. In order to make the pacakge easy to pass customs, we did not include case in the package to make the pacakge as small as possible.If you additional need carry case, please leave a message under our order comment. Thank you!

Models Coverage:
Acura, Audi, Alfa, Chevrolet, Citroen, Daewoo,Fiat, GM, Honda, Hyundai, Isuzu, Infiniti, Jaguar, Kia, Land Rover, Lancia, Lexus, Lincoln, Mazda Japan, Mazda USA, Mercury, Mitsubishi, Nissan, Peugeot, Renault, Rover, Seat, Skoda, Suzuki, Toyota Japan, Toyota USA ,Volkswagen and VW/Audi (Pin code reading) .

 

Functions   

 

1. Read the vehicle malfunction code

 

2. Clear the vehicle malfunction code

 

3. Read the system data stream

 

4. Read IMMO/ECU ID

 

5. Fetch the machinery key code

 

6. Clear vehicle key memory

 

7. Program new key

 

8. Read vehicle key login password

 

9. Distinguish types of ECU

 

10. ECU-IMMOBILISER programme

 

11. Read EKA password

 

12. Programme new EKA password

 

13. Programme telecontrol implement

 

 

Install Steps   

 

For VW Transponder key matching with 5 digits Login Code

Procedure for adding transponder keys to vehicles with separate Immobilizer box:

(German Car A to year 97, for Golf 3, for Passat B4, Transporter, for Lupo, for Sharan)

1) Switch ignition ON with new key.

2) Select:  Immobilizer -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code). For example, if your Login is 1234, enter 1234 -> Save

3) Go to Adaptation

4) Enter 01 in "Channel Number"

5) Enter

6) Enter number corresponding to the total number of keys to be matched, The "Stored Value" is the number of keys currently matched. For example, Enter 2 -> Save

7) Switch ignition off and remove key

8) Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key until all keys have been matched.

9) Select:  Immobilizer -> Login. Enter Login Code. Go to Adaptation

10) Enter 00 in "Channel Number"

11) Enter 0 and Save. This will learn ECU with Immobilizer.

 

Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster   

 

(German Cars A from year 1997, for Golf 2004, for Passat B5, B6 )

1) Switch ignition ON with new key.

2) Select:  Instrument -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).For example, if your Login is 1234, enter 01234 -> Save

3) Go to Adaptation

4) Enter 21 in "Channel Number"

5) Enter

6) Enter number corresponding to the total number of keys to be matched. The "Stored Value" is the number of keys currently matched. For ex, Enter 2 -> Save

7) Switch ignition off and remove key

8) Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key until all keys have been matched.

9) Select:  Immobilizer -> Login. Enter Login Code. Go to Adaptation

10) Enter 00 in "Channel Number"

11) Enter 0 and Save. This will learn ECU with Immobilizer.

 

 

Package List   

 

1.T300 main unit

2.Cigarette Lighter power adapter cable

3.for GM/Daewoo 12P connector cable

4.for Honda-3P connector cable

5.for Nissan 2000 OBDII connector cable

6.for Nissan 14P connector cable

7.OBDII-16P connector cable c/w power input jack

8.for VAG OBDII Female to 2x2 adapter cable

9.for Chrysler-1 Adapter (138)

10.for Chrysler-2 Adapter (139)

11.for Honda 3P Adapte

12.for Mitsubishi Adapter

13.for Nissan Adapter (133)

14.for Suzuki Adapter

15.for HONDA Adapter

16.ADC 145 Adapter

17.Peugeot Adapte

18.User Manual CD