professional filling refill holder suction tool clip for HP 335 336 337 338 92 336 93 342 94 338 95 343 96 339 97 344 98 337 99 348 100 with accessories
**high quality ABS material
**small size
**simple operation with detailed manual instruction with pictures
size is 7*3.3*6.2cm
weight is 24.9g/piece
packing information | |||||
model | QTY in Inner box | QTY in master box (PCS/master box) |
G.W. (KG) |
N.W. (KG) |
CARTON SIZE (CM) |
T11 | 40pcs/inner box | 480pcs/12inner box | 15 | 14 | 46*41*42 |
T11 | 40pcs/inner box | 240pcs/6inner box | 7.5 | 7 | 37*34.5*27.5 |
Attention: The BLACK rubber pad is for the black cartridges and the RED one for yellow of and the BLUE for cyan and magenta of color cartridges.
Operation steps:
Get ready
Tear off the label on the ink cartridge to check the ink injection inlet. Please make sure the color of ink for each ink inlet.
Attention: You may need to open the refill hole by using a drilling tool.
Insert inkjet cartridges
Insert the nozzle part of the cartridge into the refill clip and push the top of the cartridge all the way in until you hear it “clicking” into place.
Refilling ink
Insert the injection needle deep into the ink injection inlet of the specific color, with the needle directed towards the nozzle.
Pull up the injection needle about 5mm backwards, and then slowly inject appropriate ink. Repeat injection for each color if necessary.
Stabilize Internal PressureConnect the syringe to the rubber hole of the refill clip, and slowly suck out internal air until 0.5ml of ink is filled in the syringe.
Remove the cartridge from the refill clip and clean the excessive ink around the nozzle, dabbing the nozzle part on soft tissue.
Install the cartridge into the printer, and run “head cleaning” process before use.