Vibration Meter Introduction:
This Vibration Meter is small in size, light in weight, easy to carry. Although complex and advanced, it is convenient to use and operate. Its ruggedness will allow many years of use if proper operating techniques are followed. Please read the following instructions carefully and always keep this manual within easy reach.
Vibration Meter
Vibration Meter Features:
1.3 same parameters in one display for 3 dimensional measurement or 1 dimensional measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.
2.High quality accelerometer for accurate and repeatable measurements
3.Optional headphones for use as electronic stethoscope.
4.Use "USB and RS-232 data output" to connect with PC.
5.Bearing condition monitoring function.
6.Provide "Bluetooth ™ data output" choice.
7.Wide frequency range (10Hz. to 10kHz.) in acceleration mode
Operating conditions: | ||||||
Humidity | below 90% RH | |||||
Battery indicator | low battery indicator | |||||
Dimension | 124x62x30mm//4.9x2.4x1.2 inch | |||||
Weight | 120g(not including battery) | |||||
Display | 4 digits, 18 mm LCD | |||||
Transducer | Piezoelectric accelerometer | |||||
Parameters measured | Velocity, Acceleration, and Displacement RPM and Frequency | |||||
Optional accessories | RS-232C cable & software: 1.USB adaptor for RS-232C 2.Bluetooth interface | |||||
Temperature | 0-50℃ | |||||
RPM(revolution) | 5-100,000r/min |
1. Comming with carrying case,outer package will be carton box.
2. MOQ:1set.
3. We accept T/T. Western Union.PayPal & Secure Payment.
4. We offer 18 Month's Warranty on all product.