Introudction
Reflective Material - Diamond Bright Grade Metalized Microprismatic Retroreflective Sheeting
consists of microprismatic lenses that are intergraded in a transparent,smooth surface,tough and
weather-resistant synthetic resin,and backed with a pressure sensitive adhesive and paper liner.
YS Reflective Material-Diamond Bright Grade Metalized Microprismatic Retroreflective Sheeting is
designed to use on vehicles that have to conform requirements of laws.If they are applied to properly
prepared,Diamond Bright Grade Metalized Microprismatic Retroreflective Sheeting should provide
a long time field performance.
YS Reflective Material-Diamond Bright Grade Metalized Microprismatic Retroreflective Sheeting
conforms to multi-international standards and codes,it can be used on truck, trailers,fleet,oil tanker,
farm equipment,automobiles and all types of mobile and industrial equipment.
Features and Benefits
- 5+ Years Durability
- Super Intensity Reflective Brightness
- Wide Angularity
- Different surface patterna and color available
- Superior Durability Withstands High-Pressure Washing and Resists Edge Lift
- Perforating (Kiss-Cutting) Is Acceptable
- Microprismatic Technology Ensure Long Distance Visibility
- Impact Resistant,Keep Retroreflective Performance after Impact-Maintains Safety After Collision
or Year of Wear
- Standard Shipping Dimensions 48'' X 150ft Roll
- Adhesive Easily to Flat and Curved Surfaces
- Custom Logo Imprinting Is Acceptable
Physical Performance
The following technical information should be considered typical only and should not be used for
specification purposed.
Physical Property
Thickness (Caliper) | 0.014-0.018 inch (0.36-0.46mm) |
Performance Range | -32°F to 200°F (-34 to +94°C) |
Adhesion (ASTM D4956) |
Test Method: 90°C Hanging Weight |
Shrinkage (ASTM D4956) |
Test Method: 9x9 Inch Panel |
Flexibility | Test Method:Wrap around a 1/8” mandrel @ 32°F (0°C) |
Chemical Resistance
| Test Method: (SAE J1967) Test Result: Not Affected by toluene, #2 diesel fuel, gasoline (Leaded) Kerosene,TSP Detergent, Xylene, and Dilute Metal Brighteners |
Impact Resistance | Test Method: 100 In-Lb, 5/8 Inch Tip FMVSS Requirements: No Damage Outside |
Corrosion Resistance | Test Method: (ASTM B-117 Salt Spray) Test Result: No Effect 1000 Hours |
High Pressure Wash | Test Method: 45° Angle, 1200 psi, 8 Inch Away Test Result: No Peeling Off |
Maintenance
Cleaning
Routine washing is recommended for maximum performance. The following cleaning methods are
recommended.
• Wash with sponge, cloth or soft brush using water and detergent.
• Automatic truck/car wash or standard high-pressure hand spray:
Maximum pressure-1200 PSI/ 80 bar.
Maximum water/wash solution temperature- 140°F/ 60°C.
Minimum of 12 inches/ 30cm distance of cleaning jet(s) from markings.
Cleaning wand or jets to be at no greater angle than 45 degrees from perpendicular to the marking
surface.
• When using metal brighteners, follow manufacturer’s recommendations for dilution.
Thoroughly rinse from markings after soaking vehicle.
General Performance Considerations
YS Reflective Material-Diamond Bright Grade Metalized Microprismatic Reflective Sheeting Series
will provide maximum durability when:
• Recommended procedures are followed.
• Marking is applied to vertical surfaces.
Actual durability will be based on actual customer use, field testing, exterior exposed testing and
artificial weathering testing.
Durability can be reduced if recommended techniques are not followed:
• Failure to cut markings around rivets, seams and body are panels.
• Improper use of high pressure cleaning.
• Spillage of chemicals or solvents.
• Improper application or surface preparation.
Solid Color Pattern Fabric Base with Line Pattern
Triangle Pattern Honeycomb Pattern
Block Pattern Arrow Pattern