Swimming Pools and Water Tanks Paint at Best Price
Ktisepox Piscine is an Epoxy pool coating (two-components) that protects surfaces swimming pools and water reservoirs from water ingress and chemical abrasion.
This product is resistant to acids, alkali, and oils. The pool coating is suitable for both freshwater and saltwater.
KTISEPOX PISCINE can be applied on a variety of surfaces such as cement mortar, pool tiles, cement mortars, and old epoxy surfaces, etc.
It is not advised to apply directly on concrete foundations, but rather have the foundations waterproofed first with a cementitious slurry.
Prior to applying the pool coating we strongly recommend that you prime the surface with Ktisepox Hydro PR.
When applying on tiles make sure that all gloss and coating of the tiles have been removed before attempting to coat over.
In order to prolong the lifetime of the epoxy paint, we strongly recommend to always keep the pool filled with water. If the pool is not in use, covering the pool will maintain the pool coating for a longer period of time. The coating requires re-coating every 2-3 years. The product is available in white color, light blue (5012) as well as dark blue (5013)
TECHNICAL INFORMATION
KTISEPOX PISCINE can be applied on a variety of surfaces such as concrete, plaster, cement mortar surfaces, tiles, old epoxy surfaces, etc.
SURFACE PREPARATION
Thorough surface preparation is critical in order to ensure maximum adhesion and optimal results. The substrate should be grinded by mechanical means. Acceptable methods are diamond- or sand-grinding machines, etc. Before applying the primer. The surface must be completely dry, free of loose material, dust, oils, greases, etc. If there are oils or other chemical materials they must be removed either by additional grinding or by using special cleaning detergent.
When applying KTISEPOX PISCINE on bare concrete, it is strongly recommended to apply two layers of elastic cement based slurry in order to improve waterproofing properties.
When applying on fresh concrete, ensure that the concrete is at least 28 days old, before priming and applying KTISEPOX PISCINE.
When applying on tiles, ensure that the tiles are ground enough to remove all shininess.
PRIMER
The surface must be primed with KTISEPOX PR before applying KTISEPOX PISCINE. The KTISEPOX PISCINE system can be applied once the primer is dry. The drying of the primer depends on environmental as well as substrate conditions (3-12 hours).
Filling Cracks and joints
Cracks and holes should be repaired with KTISODUR G epoxy putty and let at least 12 hours to dry. Before applying KTISEPOX PISCINE the filled area should be lightly sanded and cleaned. If quick curing times are required to use polyester putty (approx. drying time 15-20 mins.) instead of epoxy putty.
Preparing KTISEPOX PISCINE
The contents of buckets A and B need to be emptied in a third barrel or bucket. It is important to empty all the content of both buckets and ensure that all thick material stuck to the bottom of the bucket is also mixed. The mixing of the two materials needs to be consistent (with a mixer) and should last for at least 3-4 minutes at 300rpm. Scrappy or “lazy” mixing can lead to improper curing of the material and as a result, some areas of the epoxy surface will stay “soft” and never harden properly.
Applying KTISEPOX PISCINE
The mixture (KTISEPOX PISCINE A + B) should be applied with a roller or with an airless spray gun. Apply at least two layers of the material. The second layer should be applied within 12-24 hours. If more than 24 hours have passed before the second layer is coated, then the surface should be roughened up with a sanding machine (to ensure better adhesion) and be cleaned of all dust and dirt. Recommended CONSUMPTION
For every layer of KTISEPOX PISCINE expect to consume at least 0,250 kg/m².
Actual consumption may be higher depending on the quality of the surface.
Further technical information, as well as multimedia material regarding the application of industrial floors, can be accessed at the KTISIS website.
Specifications
Product Name
Epoxy Pool Coating
Color
Sky Blue (RAL 5015), Marine Blue (RAL 5013) and White
Packaging
Available in fixed weight sets (A+B) of 12kg and 5kg
Quality is of utmost importance for our company. The high quality of our products is the key factor when nurturing close relationships of trust and confidence with our customers.
Ktisis company is certified with ISO 9001:2000. Quality control takes place throughout the production phase of our products as well as upon completion of production and before packaging begins.
Samples of each production set are kept for a specified space of time in the company (time frame depends on the product in question). Finally before major projects are about to commence, we conduct a test application on a small pilot scale so that we can make a precise assessment of the final result.
We provide certificates of conformity for our products (CE marking) and several of our products are submitted to 3rd party laboratories for independent testing of EU standards.
Our Certificate
Get in Touch with Us
No desirable products?
Sourcing assistant>
How to start your business
Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier