Surface Finishing Screed Wall Plaster Smoothing Machine

Introduction Of  Surface Finishing Screed Wall Plaster Smoothing Machine

1. Automatic Wall Cement Plastering Machine uses the conveyor belt to transport the plaster forward and upward, can be completely wiped to the top (1 mm does not stay) with the conveyor belt completely wiped to the top. The conveyor belt can be manually stopped or added at any position to achieve the window up and down, above the doorway Plastering (Note: at least 50cm distance on the door and window, because the conveyor belt automatically stops at the top 45cm for the plasterer) can also be filled with plaster Insufficient to cause secondary smearing after the wall is ash-deficient, or you can intermittently send plaster to reduce the floor plaster on the way. 007

2. Automatic Wall Cement Plastering Machine uses hydraulic telescopic rods, top and top, can fix the machine in ten seconds, and the chassis is not forced, the mobile machine only needs to be released like a jack, the main pole depends The weight is automatically lifted by the foot, which is the fastest and strongest.

3. the width of the wiper is designed according to the doorway of the suite (80cm). It is 3cm wider than the fuselage and can be freely entered into the inner and outer houses. The dead angle can also be easily done.

4. behind the wiper board is equipped with two micro vibrators, hollow drum and high wall force.

5. The Automatic Wall Cement Plastering Machine is equipped with a sealed universal wheel that can be easily moved to wherever you want.

6. completely imitating the artificial design of the artificial.

Parameter Of  Surface Finishing Screed Wall Plaster Smoothing Machine

Photos Of  Surface Finishing Screed Wall Plaster Smoothing Machine