R100 series is an intelligent cellular router designed for industrial applications requiring faultless connectivity.It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc.Software-defined, multi-carrier networking, dual SIM models,802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting, wide operating temperature range, and IP30 metal housing, the R100 is a convenient yet reliable solution for any industrial wireless applications.
Frequency | ||
LTE | B1, B2, B3, B4, B5, B7, B8, B20, B28 | |
WCDMA | WCDMA: 2100(B1), 1900(B2), 850(B5) | |
EV-DO | 800(BC0) | |
GSM/GPRS/EDGE | 850/900/1800/1900 |
• 10/100 Base-T RJ45 Ethernet port
• RS-232 or RS-485 Serial Console Port• Network Address Translation (NAT)
• Port Forwarding
• Host Port Routing
• VRRP and Dynamic DNS
• Reliable Static Route
• DNS, DNS Proxy
• DHCP Server
• IP Passthrough (option)
• VLAN
• Host Interface Watchdog
• PPPoE
• TCP/UDP PAD Mode
• Modbus (ASCII, DTU, Variable)
• PPP
• Reverse Telnet
• (6) pin 3.5mm terminal block.
• (2) DI, (1) DO, (1) Relay.
• Input ON Voltage: 5 to 30 VDC.
• Input OFF Voltage: 0 to 3 VDC.
• Output < 50mA @ 30VDC
• IPSec, GRE, and OPENVPN Client
• Up to 10 concurrent tunnels
• Split Tunnel
• Dead Peer Detection (DPD)
• Multiple Subnets
• VPN Failover
• Remote Authentication
• DMZ
• Inbound and Outbound Port filtering
• Inbound and Outbound Trusted IP
• MAC Address Filtering.
Antenna Interface: SMA Female, 50 ohms impedance
• Tracking Sensitivity: better than -144 dBm
• Horizontal position accuracy: 2.5 m
• Time-To-First-Fix: 29 s
• Protocol: NMEA-0183 V2.3