Hardware Specifications | ||
Size(L*W*H) | 168mm (L) *130mm (W) *28mm (H) | |
Optical signal access | 1*GPON/EPON | |
User interface | 1GE+1FE+VOIP+2.4G WLAN +CATV | |
Indicator light | POWER、PON、LOS、LAN1、LAN2、TEL、WIFI、WPS 、CATV | |
Button | Power switch Button, Reset Button, WLAN Button, WPS Button | |
Weight | 230g | |
Power adapter input | 100V~240V AC,50Hz~60Hz | |
PowerSupply requirement | 12V DC,1.5A | |
Power consumption | <10w | |
Working temperature | -10°C ~ +45°C | |
Environment humidity | 5% ~ 95% (Non-condensing) | |
PON Interface | ||
Module type | Class B+ SC/APC | |
Working wavelength | up 1310nm,down 1490nm | |
TX Optical power value | 0.5~4dbm | |
RX Optical power sensitivity | -28dBm | |
Transmission distance | 0~20km | |
Transmission rate | GPON:Up 1.244Gbps;down 2.488Gbps EPON:Up 1.244Gbps;down 1.244Gbps | |
Ethernet interface | ||
Interface type | 2* RJ45 | |
Interface parameters | 1*10/100/1000Mbps and 1*10/100Mbps | |
Wireless | ||
Working mode | IEEE 802.11 b/g/n | |
Antenna pattern | External 2T2R External antenna | |
Antenna gain | 5dBi | |
Wireless bandwidth | Support 20MHz/40MHz | |
Interface rate | Maximum rate 300Mbps | |
SSID | Up to 4 SSID broadcasts are supported | |
POTS Interface | ||
Interface type | 1* RJ11 | |
Voice agreement | SIP | |
Codecs | G.711/G.723/G.726/G.729 | |
Integrated circuit protocol | Gr-909 protocol is applicable | |
CATV Interface | ||
Optical receiving wavelength | 1550±10nm | |
Optical reflection loss | ≥45dBm | |
RF, WDM, optical power | +2~-15dBm | |
RF frequency range | 47~1000MHz, RF output impedance: 75Ω | |
RF output level | 78dBuV | |
AGC range | 0~-12dBm | |
MER | ≥32dB@-15dBm |